Brewer's Edge® 76 Quart Brewkettle

  • Item #S82
  • Price: $169.99
  • Part #
- +
Share |

This Brewer's Edge pot features organ welded construction, .031” thickness 210 grade welded stainless construction, and a ½” female NPT port for a thermometer that comes plugged with a stainless plug. The handles are welded on.

These are a great value for the money. This pot is too large to use on a home stove, an outdoor burner is recommended. Not recommended for use on an induction stove. 19½” tall, 18" wide.

Average rating 9.5 out of 10 ( based on 4 reviews )

Best Value I've Found

Review by Jay on 7/29/2013

This brew kettle is way cheaper than other stainless kettles this size. The pot has a small dent where the thermometer port is located, and the lid is a little flimsy, as the description says, but neither matter. This pot is the best value I have found, and if I highly recommend it. It is great for doing outdoor brewing on a propane burner, and when doing 5 gallon batches in this large pot, it is impossible to have boil-overs. Highly recommended!

Good Value

Review by Thomas on 5/23/2014

For those looking to move up to 10 or even 15 gallon batches (15 gal is pushing it), this is the best value out there. It is thinner than most other pots but for the price, you can't expect to have a bullet-proof kettle. I converted mine to an e-kettle, and when drilling the hole for the element with a step drill, the metal tended to roll back on itself (not like the clean cut you should get with a larger gauge metal). However, it still took the weld less fitted element without any leaks. just take good care of it and don't throw it around the garage and it will serve you well.

Giant, inexpensive

Review by Bruce on 6/21/2014

large and versatile. As said before, if you don't abuse it this thing will serve you well. 15 gallons is okay, but you will want to watch for boilovers.

Great Product, Sturdy!

Review by JOE on 2/9/2016

Have had mine going on three years and it has seen many a brew! Still holding up strong and works great. I will buy this again when/if needed.

Write a Review

Oct 17, 2020 by Richard

Q: Since this is the thinest metal on the market an the poorest grade stainless steel, have you had many problems with holes and rust?

A: As long as you do not use chlorine bleach to sanitize, or any chlorine based cleanser, you should be fine. Also, Kombucha has a lower pH than beer, and we do not recommend using this as a Kombucha fermenter. So, if it is used as a boiling pot for beer, which is normally not sanitized with anything but heat from the stove, it will last for years.

Apr 04, 2018 by Richard

Q: Is the inside of the drain port threaded such that I could rig up a pickup tube?

A: Yes, it features 3/8" internal valve threads to fit our item R49 KettleScreen. You can also attach any other 3/8" male thread attachment such as a pickup tube.

Sep 16, 2017 by Robert Milewsky

Q: Does this kettle have volume etchings on the inside? If not can you guys provide this service. Thanks

A: This does not have volume markings and we do not provide this service.

Ask a Question