Our new NSF certified stainless steel five gallon kegs from KegLand have two ball-lock male quick disconnect fittings that hold pressure even when not connected, allowing you to have several kegs aging while one is tapped. Also referred to as Corny Kegs or Soda Kegs. Precisely made with smooth robotically welded interior welds for ease of cleaning to stringent NSF standards. Made in China.
Features a 3 by 3.5" oval lid for easy cleaning, and a pressure relief lid mounted valve for safety. An exclusive stainless hang tap is welded onto the inside of the lid to make it easier for you to suspend dry hopping bags and hop infusers. 25" tall, and 8½" wide. These require 26" of headspace once you connect ball lock fittings and hoses. Rubber bumpers on top and bottom protect this keg from damage.
Aug 17, 2019 by Will
Q: Whats the best way to clean a new keg before first time use? I got one from you guys just a week or so back. Wanna remove any oils or gunk left over from the manufacturing process. And what do i need to lube the o-rings/gaskets with? Thanks.
A: Rinse with Brewer's Edge or PBW cleanser and hot water is the best way to remove any manufacturing deposits. Then rinse with water. As far as the rubber parts, Keg Lube is a good option, although you can use a new keg for a while and not worry about the rubber until it becomes a little older.
Sep 05, 2018 by Greg
Q: Is there a pin lock option for hose connections or would you need to buy separate and install?
A: Pin lock is becoming more and more obsolete, so you would have to make this conversion yourself with some pin lock posts. Cornelius brand pin lock posts would be the best option to try although we have not tested to see if these will thread on.
Jan 01, 2018 by Paul
Q: kegs are new for me: 1) how does one keep the beer cold once it's kegged? 2) if I buy a keg from Williams, does this include everything needed to draw the beer from the keg (tap, hoses, etc.) or is that extra? Thx.
A: To keep the beer cold, store the keg in a refrigerator. The keg does not include needed tap and gas hose lines, for a complete system featuring this keg see our Home Beverage System, product B62.
Sep 28, 2017 by Eric
Q: Is the liquid dip tube on these kegs straight?
A: The liquid dip tube is curved.
Kegland Keg
Four kegs so far and very happy with the Kegs, Great fit and finish.
New Corny Keg
Currently serving the first batch out of this Kegland keg. It shipped quick, well packaged, and product is flawless. Welds are really clean, immaculate finish, held 36psi for 3 days empty perfectly. Kinda pricey, but will more than likely last a very very long time.
5G Keg
It’s working great! Delivered quickly.
Compare to the 2018 keg
This is a review / compare to the keg king that Williams sold in 2018 (the one in the picture); the 2020 keg land (looks almost the same 99.999%) 1.) the kegs looked good = new and a little whiter than the picture. = shipped well. 2.) welds are good = maybe not as good as keg king but 99% 3.) the finish is more pickled, less electropolished = lighter colored but rougher than the keg king = 95% 4.) compared to old ale kegs, from somewhere else, these are a nicer = 105% a. Keg king kegs were Iso 9001 these are not stamped as such; ISO 9001 cert is to help keep quality uniform (good or bad but uniform). b.) they come with a nice little label (for batch marking) c.) they arrive with pressure = sealed and clean! (I will still power scrub them and clean all the parts/ same as all new kegs) Overall 4.6 stars, Quality 4.5 Value 4.8 (5.0 with the 2 or more discount) just wished there was an option to have them electropolished
Dented
I haven't actually filled/pressurized this keg yet, but it seems like standard cheapo new kegs. However, it was packed terribly for shipping and arrived with a several dents. Nothing that's going to probably affect performance, but it's just a bummer when you're buying a brand new keg to have it already dented. William's Brewing Responds: We are contacting you about replacing this damaged shipment. Thanks for your business!