The Nukatap Counter Pressure Bottle Filler is a great way to fill bottles directly from your taps without compromising your kegged beer’s flavour, aroma or carbonation levels. All stainless steel construction. This enables you to use a wide range of chemicals for cleaning this device without the risk of damaging the device or accessories.
It will fit any tap with 10.0 mm inner diameter spout/nozzle including Nukatap and Intertap faucets. This fits Evabarrier 8mm outer diameter tubing for the gas line. It also fits forward seal Perlick and Ventmatic faucets. Just connect it to your regulated C02 source and a beer tap, and you are ready to fill bottles.
The integrated counter pressure relief valve gives you good control of the counter pressure and thus the filling speed. How fast the bottle can be filled without too much foaming depends on CO2 level, beer temperature and bottle temperature.
Fits all glass beer bottles that accept a bottle cap, as well as 16 ounce and 32 ounce 'Grolsch' style swing top bottles. Does not fit PET beer bottles.
This unit comes with a carbonation cap so you can quickly connect and disconnect your regulated C02 gas line, and duotights so you can fit 8mm Evabarrier outer diameter tubing to the gas input ball lock.
Not Included: You will need a length of 8mm EvaBarrier tubing to connect to the side Gas In port, to provide counter pressure and purging gas. This gas should be at the same pressure as your Kegerator dispening gas pressure, and should be connected to your kegerator gas regulator. You can also connect a gas ball lock fitting to this port with the included adapter if that is easier.