This all stainless Draft Beer Gun is perfect for outdoor dispensing. Just pull the trigger handle to open the valve to dispense. This hefty gun features a ¼" hose barb on the bottom for connecting to 1/4" or 3/16" interior diameter draft tubing.
We recommend 4-5' of 3/16" when using 3/16" interior diameter line, and 10' if you are using the wider 1/4" interior diameter line.
This professional grade gun weighs 15 ounces, and is constructed of 304 grade stainless, with a stain resistant brushed finish.
We recommend 4-5' of 3/16" when using 3/16" interior diameter line, and 10' if you are using the wider 1/4" interior diameter line.
This professional grade gun weighs 15 ounces, and is constructed of 304 grade stainless, with a stain resistant brushed finish.
You can be the first one to write a review.
Apr 14, 2018 by Daniel
Q: Can this be disassembled at all for deep cleaning? Looks well built, but I wouldn't want the moving parts to get sticky or harbor nasty off-flavor agents.
A: Yes, although we do not sell replacement parts, so be careful about not losing any pieces. We find that a rinse with cleanser or line cleaner is all that is needed periodically.
Jul 01, 2017 by Humblehops
Q: Could this possibly be modified with bits and pieces to become a bottle-filling device similar to the Blichman beer gun or the Last Straw?
A: Probably not easily. For a very simple low tech bottle filling device, you could try a cobra faucet from a draft system (our item D17), and insert 3/8" inner diameter tubing into the end of the faucet. Put the tubing in the bottom of the bottle and fill. You will get some foaming and lose a little carbonation but it works fairly well, particularly if you get the beer and the bottles very cold (as close to 32° F as possible).
