Unlike white plastic semi-porous HDPE Fermenters, the Kegland Fermzilla 60 Liter All Rounder is made of smooth non porous PET plastic, to make it completely impervious on the inside to krausen and beer film soaking into the plastic, while protecting your ferment from the oxidizing effects of air contact coming in from the outside. This fermenter is pressure rated to 35 PSI, and includes a Pressure Kit and Spundling Valve to use for pressure transfers, and even to use as an extra ball lock keg. Super smooth PET plastic makes it easy to clean and hard to contaminate.
• Easy Grip Lid with hex tool for tightening ball locks
• Includes Pressure Kit and Spunding Valve
• Low profile attached base increases stability
• Oxygen barrier to prevent oxidation
• Tap Free Design for easy cleaning and less chance of infections
• 4¾" wide lid making it easy to clean
The Fermzilla lid makes it easy to add things like a Temp Twister Cooling Coil and KegLand Thermowell for year round temperature control. Perfect for brewing, wine making, kombucha, and spirit wash fermentation.
Includes All Rounder Tank with integral stand, pressure lid with our item C71 Spunding Valve and our item C77 Pressure Kit with a weighted float ball silicone beer pick up tube, Fermzilla Lid with 35 PSI pressure relief valve, adhesive gallon markers, and an adhesive strip thermometer. You do not need an airlock as fermented produced C02 escapes through the Spunding Valve.
36" tall with lid and included spunding valve installed, and 14" wide.
IMPORTANT NOTE: Do not put liquids inside this tank over 140° degrees F. It will melt the tank. Do not switch out the red 35 PSI Pressure Relief valve for a higher rated valve, as the tank may explode!
HYDRO TEST NOTE: If you plan to pressure ferment, Fermzilla tanks must be hydro tested every two years. All new tanks are marked with a manufacture date which means the tank should be hydro tested 2 years after this date if you plan to pressure ferment. So, if you plan to ferment under pressure, order this knowing you will need to perform a hydro test every two years. Disregard this if you do not pressure ferment.
Current stock manufactured date: 05/16/2026
Click here for hydro test instructions
Click here for a user's manual
You can be the first one to write a review.
You can be the first to ask a questions.
