Weldless Brewer's Edge® Pot Thermometer

  • Item #L65
  • Price: $24.99
  • Part #
- +

In stock, will ship on Monday, December 6

The Brewer's Edge Weldless Thermometer takes a precision stainless steel dial thermometer, and adds a unique sliding reference pointer. Features a 3" dial and 3" probe. Just set the sliding red pointer to your reference point (say 154 F for mashing) and it provides quick visual reference that you are at your target temperature. Great for mash tun and sparge water tanks, although you do not really need a thermometer if you are just making malt extract beers. 

Easy to Install - Unlike Weldless Pot Thermometers with loose washers and O rings, The Brewer's Edge Weldless Thermometer features a unique recessed silicone O ring mount, for a positive seal in any pot. You only need to drill a 7/16" hole, the smallest (and easiest to drill hole) of any weldless pot thermometer.

Features a 60� to 220�F. range, 2� calibrations, a tempered glass lens, and a resetting screw, so you can precisely adjust the thermometer for a particular temperature range. Although heat resistant, it should not be allowed to contact open flame or come near open flame, so it must be installed far enough up on your pot to avoid being licked by burner flames.  

Click to download the installation instructions

 

 

(6)
Average rating 10 out of 10 ( based on 6 reviews )

Good thermometer

Review by Pete on 8/8/2018

Picked up two of these when on sale at a discount. They read a couple degrees different, but I can easily compensate for that. Wasn't sure about how they would seal, since most I've seen are designed for the gasket to be inside the kettle. Drill the hole as specified, smooth all the burrs and it will seal like a champ....mine does.

Happy

Review by David on 10/12/2017

Fast shipping, received it within 2 days. Easy to install in keggle, even without a step drill, and no leaks! One happy camper here!

great buy

Review by Neal on 10/17/2014

Bought when the email special came out, still kicking myself for not getting 3! Super easy install, darn near calibrated out of the box.

easy

Review by Matthew on 8/27/2014

super easy to install. doesn't leak at all. makes my brew day easier on big system.

Weldless Pot Thermometer

Review by Thomas on 5/24/2014

Performs perfectly. I rotate the 200 F mark to coincide with 12:00.

Jul 09, 2019 by Nick Williams

Q: Will this work in Ss Brewtech kettles?

A: It fits a 7/16" hole, so if this kettle has such a hole, or you can drill one, it will work.


Nov 20, 2016 by norden cegelske

Q: will this survive being immersed in pot cooling water? as in chilling wort after the boil???

A: No, it has a rubber seal around the glass, but it is not meant to be a immersion thermometer.


Ask a Question