2 Micron Hose Barb Oxygen Stone

  • Item #P66
  • Price: $11.99
  • Part #
In stock - 3 units available.
- +
Share |
This type 304 stainless oxygen stone features a 2 micron stainless diffusion stone, coupled to a 1/4" male hose barb, to fit any 1/4" interior diameter tubing. This works with oxygen and fish tank type air pumps. 2" long, 1/2" wide.

Note: Our Q11 Oxygen Regulator does not fit this, as its hose barb is smaller than 1/4"
(3)
Average rating 8 out of 10 ( based on 3 reviews )

Home Brewer

Review by Tarsicio on 7/25/2013

I found that you need a good pump for this to work properly, but when it does , it really gets the yeast going nicely.

Works well

Review by Jesus on 8/2/2013

I have tried this and the .2 micron stone. This one works better as it doesn't clog as easily.

Poor Workmanship

Review by James on 7/18/2016

I use the stone for carbonating. The joint between the barb fitting and the stone was not sealed properly, so relatively large bubbles emit from the joint, compared to the desirable small bubbles from the stone. I had to seal the joint with epoxy to get the stone to work properly. William's Brewing Responds: It sounds like you received a defective stone. We are sending a replacement out no charge. Sorry for the problem with this.

Write a Review
Ask a Question