• KegLand Series 4 Kegerator
  • Shown with Flow Control Faucets
  • This shows the digital controls with fan switch (the fan is on)
  • This shows the tower cooling fan and glass holder
  • With 3 full sized 5 gallon kegs, you will have to remove the glass holder
  • With a 2.5 gallon and 2 five gallon kegs, the glass holder can remain
  • Converted to a fermentation chamber set at 63° F.
  • Converted to a refrigerator with the included shelf set at 33° F.
  • The drip tray is removable for easy cleaning
  • Back of unit shown with optional 5 Pound C02 Tank

click on thumbnail to zoom
Item #: B26
Our Price: $599.99
Pick Your Optional Beer Tower & Faucet(s)
Free Items Included
Discounted Accessories
Signature Required on delivery
Share |


•  Designed by Homebrewers for Homebrewers
•  Wide 26° to 82° F Range
•  Forward Seal Stainless Intertap Faucets with optional tower selection
•  Easy to connect Duotight fittings included with all towers
•  Tower Cooling Fan with front panel switch
•  Converts to a Fermentation Chamber with a removeable shelf
•  Chilled Glass Storage
•  Removable Drip Tray for Easy Cleaning
•  Approved For Commercial Use
  One Year Warranty (and we stock all vital spare parts in case you need them after the warranty period)

Cold does not rise. You will find that a beer tower elevated above a refrigerator will always remain warmer than the refrigerator, resulting in initial pours from the kegerator that are warm and foamy, followed by colder pours once you have dispensed a beer or two. At home this is a real problem, unless you pour beers in quick succession. This is the only kegerator to include a tower cooling fan as standard equipment, and also feature a fan on/off switch on the front digital control panel.

When it is time to pour a glass, the Series 4 includes a handy glass holder inside to keep your beer glasses chilled. Just open the door and grab an ice cold glass and dispense. The beauty of the KegLand Series 4 is the extended range thermostat included. Unlike kegerators with standard 30° to 50° temperature ranges, the Mark 4 can be adjusted easily with the front panel digital display from 26° to 82° F (ambient temperature permitting), which means you can also use your kegerator as a fermentation chamber for ales in summer, a small refrigerator for food items, or even a wine cellar.

The drip tray rests on top of the unit, and can be removed for easy cleaning. This simple two piece design cleans up quick in your sink, and eliminates the need to clean a sticky drip tray on the unit.

 Included with all models are a a C02 bottle mounting bracket, removeable refrigerator shelf, integral tower cooling fan. You select the beer tower/faucet option that is right for you, and a free KegLand MK4 Dual Gauge Regulator is included.

Setup is easy with Duotight connections included for everything from the faucet shanks to the included regulator. These make it easy to connect and disconnect gas and beer lines, and eliminate the need for hose clamps. As noted below, you will need additional parts depending on how many faucets you get, and if you want to dispense home brew or a commercial keg.

Note that kegerators need 4" of clearance on both sides when installing so they do not overheat, so this model cannot be installed flush into a countertop with no side clearance like a dishwasher.

Needed but not included for each ball lock home brew keg supplied faucet in your tower:
1 B11 Threaded Gas Ball Lock
1 B12 Threaded Beer Ball Lock
2 Z84 Duotight Flare Adapters

For example, if you buy a Triple Tower and plan on dispensing three ball lock kegs, you will need:
3 B11 Threaded Gas Ball Locks
3 B12 Threaded Beer Ball Locks
6 Z84 Duotight Flare Adapters

Needed but not included for each Sankey commercial beer keg supplied faucet in your tower:
1 B70 Sankey Coupler or B71 (if you prefer stainless)
2 Z94 Duotight Sankey Threaded Adapters

For example, if you buy a Double Faucet Tower and plan on dispensing two commercial kegs, you will need:
2 B70 or B71 Sankey Couplers
4 Z94 Duotight Sankey Threaded Adapters

Outside Dimensions:
24" wide
24" deep, 30" with C02 Bottle Mounted on back
33.5" tall (just the box, no drip tray, caster wheels, tower, or chrome guard rail)
36" tall (with caster wheels but no drip tray, tower, or chrome guard rail)
52" tall with caster wheels and tower

Internal Dimensions:
20" wide
16.30" deep
28" tall (24" clearance under glass rack which can be removed)

Power Consumption:
.09 Amps

The Kegs Below Will Fit Inside
5 Gallon 8½" diameter Ball Lock or Pin Lock  Cornelius Keg - 3 (you will need to remove the glass chilling rack)
2.5 Gallon 8½" diameter Cornelius Keg - 3
5 Gallon 9¼" diameter Cornelius Ball or Pin Lock Keg - 2
Commercial Kegs:
5.16 Gallon Sixth Barrel - 2
7¾ Gallon any type - 1
15½ Gallon - 1

Depending on your location, this ships via GSO or by Truck signature required. Please provide a good phone number when ordering, as the delivery company may need to call you to schedule delivery.

Kegerator Normal Operating Sounds
KegLand Kegerators have been manufactured with the new r600a refrigerant gas used on many appliances. It is used because it is the most environmentally friendly gas and it is also extremely energy efficient. The new r600a gas does make some unusual sounds and we have recorded, amplfied, and included links to the sounds below so you know what kind of sounds this modern unit makes (all units with r600a gas make similar sounds).

Outside the rear of the unit near the Compressor Click On
Outside the back of the unit near the Compressor Click Off
Inside the Cold Plate with Tower Fan Off
Inside the Cold Plate with Tower Fan On


Average Rating:
(based on 36 reviews)

Showing 1 - 5 of 36 Reviews:

Review and Rate this Item
by Dave
on 7/31/2019
from NY
Very good kegerator but.....
1) As noted in prior reviews there are no written instructions. This is unfortunate because the only way to know if your are putting it together properly is to keep pausing the video on the website. Not a deal breaker, but annoying. 2) In the video, the kiwi gentleman states that, "starting in 2019 we will be including updated hoses and clamps for our systems." Okay great. However, when I received it, I had what must be the old setup because all of my hoses were 5 by 8 and the clamps were the old "T" fittings. To get the hoses to fit on the fittings you have to hold the ends in boiling water. None of this is stated in the video because they are demonstrating the updated system. Again, not a deal breaker but annoying. 3) In the back of the kegerator you have to drill a hole through the fitting so the gas line fits tight otherwise there is open space. Williams was not available on a Saturday to answer the phone when I called for questions even though they were supposed to be opened. 

William's Responds:  Yes, the KegLand video mentions DuoTight fittings that have not arrived stateside yet. We have removed the video from our website until this has been corrected.  Yes, KegLand has decided to do away with written instructions with many of their products, although we have a PDF of the Kegerator assembly instructions on our website. We are open Saturdays 8-2 Pacific Time all year, except we are closed July 6th (our slowest weekend) as stated on our website.  Perhaps you called on July 6th?
by Ryan Gulino
on 7/31/2019
from Los Angeles
Kegland Series 4
This was purchased by my girlfriend for me so I could get back into brewing. I chose not to purchase the Lift Gate Delivery because I thought “ what kind of delivery service is not going to take the item off the truck for you “? I was right. The delivery guy was willing to bring it all the way in the house but I needed to go around to the garage so I loaded it into my dolly and said thank you. Once I waited the 24 hours, I began assembly and from the YouTube instructional video it was very easy to put together. I brewed my first batch and fermented at 68 degrees F. It held a good consistent temp during the process. Once I had the beer kegged, I maintain the temp around 38F. Temp does seem to be consistently off by 2 degrees so I have adjusted accordingly. It makes a different sound than an older unit because the new refrigerant but it doesn’t bother me.  Very happy with purchase. 
by Steve T
on 7/28/2019
from NH
Quality kegerator at a great price
I was just about to pull the trigger on a different brand when I came across this unit. To get the same features with the other brand would have cost at least $300 more. This unit has performed flawlessly for the 3 months I've owned it, and it also has the added advantage of Intertap faucets, which are just awesome. Delivery was handled very well. I wouldn't hesitate to recommend this kegerator.
by Hank Smith
on 5/4/2019
from Raleigh, NC
Best value and great service
I shopped around and did my research before purchasing this Kegerator from William’s Brewing.

I couldn’t be happier with it.

Overall, it is high quality.  No parts were missing or defective.  I could have put it together in a couple of hours, but I took my time over a couple of days and made a few minor modifications / additions such as adding a 4-way gas distributor, swivel nuts on all lines, and a neoprene sleeve for the tower.  The only difficulty I had was tightening the nut on the middle faucet.  It is lower inside the tower than the right and left faucets and the tool provided barely fits and reaches.  It will require patience and tinkering to figure out.

You simply will not find a better value for what you get.  I’d have easily paid $200 to $300 more for similar features in the other kegerators that I looked at.

William’s Brewing Customer Service was a great help answering my many questions about delivery options.  Surprisingly, delivery was FREE to ship this country.
by Brad
on 4/26/2019
from MN
This fridge is exactly what I wanted! It’s whisper quiet, clean looking, fits alongside a countertop/cabinet and easy to assemble. It came with all 5mm hose for gas and beer, I cut my beer lines to 11’ and with the regulator set at 12psi I get nice pours with good carbonation. You have to stick the hose in boiling water for 30 seconds or so to soften, then stick a pliers inside to widen it out to fit over the barbs of the shank ends and keg disconnects. I think one could install a 3-way gas manifold up along the glass chilling rack if they wanted instead of using the “T’s” provided in the kit. Maybe glue it in place or use a few zip ties around the screws left behind.

Overall given the price for everything and the quality of the product, I think this is one of the best kegerator packages to be found, thanks to Williams Brewing for carrying such quality equipment.
Review and Rate this Item
Robert Lander
10/12/2019 3:30:00 PM
I purchased 2 of these from you. I'm having trouble with one. The back of the unit inside has a thick layer of ice and the lines keep freezing? We have the temp set at 34 and have tried adjusting but no luck. What can I try?
It sounds like humidity over time has frozen on the back plate of your kegerator and caused this problem. Unplug the iced up kegerator and open the door, and let it sit 48 hours for the ice behind and in front of the cooling plate to all melt.  Then once the ice pack has melted, plug it back in, and it should cool as normal.
9/10/2019 4:58:02 AM
How is the carbon dioxide conveyed into the system? That is, what type of fitting is there that the CO2 tank must attach to. I am assuming I can use the 25 lb tank I have now. provided I plumb in the appropriate fitting. Is this correct?
There is a grommet on the back of the kegerator to accept your gas line. With a 25 lb tank you will not be able to store the tank on the kegerator, so it will need to sit on the ground. The kegerator does not come with any lines or fittings allowing you to set it up to meet your needs. Our complete tower kits come with the lines, but the fittings are sold separately. 
9/2/2019 3:01:51 AM
Are the faucet intertap and faucet flow control both required for each tap, or are they options which substitute for one another. If the latter, what is the difference between them?
Only one faucet is required for each tap, the Intertap Stainless Faucet (item P76) or the Intertap Flow Control Faucet (item L04). The P76 faucet is fine for most home brew uses, while customers who dispense commercial kegs find the L04 Flow Control can be useful, as excess foaming caused by a higher carbonation keg can be throttled down with the L04 flow control faucet.
8/2/2019 2:43:59 PM
What kind of a window does the shipper give as to delivery time? I can have a couple of guys help me unload the kegerator from the truck and take it inside. However, I can't have them sitting around all day waiting for the truck.
It depends, the Kegerator once removed from the pallet weighs 92 pounds in its box. If you have a hand truck, it is easy to move with one person once it is unstrapped from the pallet and eased off the truck. Generally, delivery windows are about 4 hours wide.
Ask a Question

    Email A Friend

    Send this product to a friend...