KegLand Series X Kegerator

  • Item #B26
  • Price: $799.99
  • Part #

Pick Your Beer Tower Option:

Choose Your Tower (Optional)
- +
Share |

•  Designed by Homebrewers for Homebrewers
•  Wide 26° to 82° F Range
•  Holds four Cornelius style homebrew kegs (8½" diameter)
•  Holds three 1/6 Barrel Commercial Sankey Kegs (9 3/16" diameter)
•  Forward Seal Stainless Intertap Faucets with all tower options
•  Easy to connect Duotight fittings included with all towers
•  Tower Cooling Fan with front panel switch
•  Converts to a Fermentation Chamber and includes a wire shelf
•  Removable Drip Tray for Easy Cleaning
•  Approved For Commercial Use
  One Year Warranty (and we stock all vital spare parts in case you need them after the warranty period)

Cold does not rise. You will find that a beer tower elevated above a refrigerator will always remain warmer than the refrigerator, resulting in initial pours from the kegerator that are warm and foamy, followed by colder pours once you have dispensed a beer or two. At home this is a real problem, unless you pour beers in quick succession. This is the only kegerator to include a tower cooling fan as standard equipment, and also feature a fan on/off switch on the front digital control panel.
The beauty of the KegLand Series X is the extended range thermostat included. Unlike kegerators with standard 30° to 50° temperature ranges, the Series X can be adjusted easily with the front panel digital display from 26° to 82° F (ambient temperature permitting), which means you can also use your kegerator as a fermentation chamber for ales in summer, a small refrigerator for food items, or even a wine cellar. Keep in mind the unit only cools, and does not heat, and a temperature of say 65 degrees F. is only possible if the temperature outside the kegerator is 65 degrees or warmer.

The drip tray rests on top of the unit, and can be removed for easy cleaning. This simple two piece design cleans up quick in your sink, and eliminates the need to clean a sticky drip tray on the unit.

 Included with all models are a a C02 bottle mounting bracket,and integral tower cooling fan.  You will need to provide a flat bottom 5 pound C02 cylinder (available at welding supply stores and fire extingisher serice firms). You select the beer tower/faucet option that is right for you, and a free KegLand MK4 Dual Gauge Regulator is included.

Setup is easy with Duotight connections included for everything from the faucet shanks to the included regulator. These make it easy to connect and disconnect gas and beer lines, and eliminate the need for hose clamps. As noted below, you will need additional parts depending on how many faucets you get, and if you want to dispense home brew or a commercial keg.

Important Installation Note: Series X kegerators need 4" of clearance on both sides and the back of the unit when installing so they do not overheat. This model cannot be installed flush into a countertop with no side clearance like a dishwasher. The side walls have radiators inside that dissipate heat, and they cannot be blocked.

Note: The Four Faucet Tower option should only be ordered if you are dispensing home brew kegs, as this unit only holds three five gallon sankey commercial kegs.

Needed but not included for each ball lock home brew keg supplied faucet in your tower:
1 B11 Threaded Gas Ball Lock
1 B12 Threaded Beer Ball Lock
2 Z93 Duotight Flare Adapters

For example, if you buy a Triple Tower and plan on dispensing three ball lock kegs, you will need:
3 B11 Threaded Gas Ball Locks
3 B12 Threaded Beer Ball Locks
6 Z93 Duotight Flare Adapters

Needed but not included for each Sankey commercial beer keg supplied faucet in your tower:
1 C34 Stainless Sankey Coupler with relief valve

For example, if you buy a Double Faucet Tower and plan on dispensing two commercial kegs, you will need:
2 C34 Sankey Couplers

Click here for assembly and use instructions.

Outside Dimensions:
24" wide
25" deep, 31" with C02 Bottle Mounted on back
33.5" tall (just the box, no drip tray, caster wheels, tower, or chrome guard rail)
36" tall (with caster wheels but no drip tray, tower, or chrome guard rail)
52" tall with caster wheels and tower

Internal Dimensions:
19.5" wide
16" deep
28.25" tall

Power Consumption:
.09 Amps

The Kegs Below Will Fit Inside

5 Gallon 8½" diameter Ball Lock or Pin Lock  Cornelius Keg - 4 ( or 2 Ball Lock and one 1/6 barrel Sankey keg)
2.5 Gallon 8½" diameter Cornelius Keg - 4
5 Gallon 9¼" diameter Cornelius Ball or Pin Lock Keg - 3

Commercial Kegs:
5.16 Gallon Sixth Barrel - 3 
7¾ Gallon any type - 1
15½ Gallon - 1

Note: The All Rounder Fermzilla will fit, although the 27 Liter Fermzilla with valve is too tall to fit.

Depending on your location, this ships via GSO or by Truck signature required. Please provide a good phone number when ordering, as the delivery company may need to call you to schedule delivery.


Kegerator Normal Operating Sounds
KegLand Kegerators have been manufactured with the new r600a refrigerant gas used on many appliances. It is used because it is the most environmentally friendly gas and it is also extremely energy efficient. The new r600a gas does make some unusual sounds and we have recorded, amplfied, and included links to the sounds below so you know what kind of sounds this modern unit makes (all units with r600a gas make similar sounds).

Outside the rear of the unit near the Compressor Click On
Outside the back of the unit near the Compressor Click Off
Inside the Cold Plate with Tower Fan Off
Inside the Cold Plate with Tower Fan On

Average rating 9.04166666666666 out of 10 ( based on 48 reviews )

Great Kegerator for the HomeBrewer

Review by Phil Pawelski on 1/11/2017

I order my Mark 4 - 3 Tap kegerator and it arrived damaged. I called customer service at Williams Brewing and they were awesome to deal with. They re-shipped me a different kegerator right away and it didn't cost me anything! A+++ Thank You!

Great Kegerator!

Review by Anthony Wilson on 1/18/2017

This is by far the best value triple tap kegerator I have found. I was amazed that they would ship it at their low standard rate. It arrived a few days after ordering. It was fairly easy to assemble and it works great. It is better than my old kegerator and it cost a lot less.

Excellent value!

Review by I Brown on 1/31/2017

Holds 3 kegs easily with room to spare. A must have for homebrewers! Love it!

Great Purchase

Review by Miles on 3/1/2017

A little more set up and assembly time than I thought, but it works great. Not sure why I need such long beers lines. I installed a Co2 distributor. So far so good - no problems!

Fantastic setup

Review by Andrew Hanson on 3/10/2017

I really just took delivery of this and am loving it. One thing I would make clear to any would be buyers, if you have low profile cornys, 3 will most definitely not fit. I have 2 of the low profiles and it was a Tetris game to make them fit with one of my standard ones, but they're all in there and the door closes unobstructed. Bottom line, if you're looking for great value in a kegerator designed for home brewers with a lot of above average features, this is what you're looking for.

Write a Review

Nov 16, 2020 by Rodney

Q: Where is it made

A: China

Nov 09, 2020 by Alan

Q: Can I use this in my garage?

A: Yes, although in excessively hot environments, the compressor life will be shortened.

Jul 09, 2020 by c-rus

Q: My neighborhood can't fit tractor is this unit delivered?

A: This is delivered by a tractor trailer via a major trucking company. We can also arrange to have you pick up the unit at a freight terminal near you if this is what you need. Please call 800-759-6025 or for more details.

Jan 01, 2020 by Keith

Q: I've just recently ordered the kegerator with no tower, as I have my existing hardware from my previous kegerator. Does this unit still come with the tower attachment screws, and if not does anyone know what the thread sizes are?

A: It does not come with tower screws. Tower screws are M5-0.8 metric thread.

Oct 12, 2019 by Robert Lander

Q: I purchased 2 of these from you. I'm having trouble with one. The back of the unit inside has a thick layer of ice and the lines keep freezing? We have the temp set at 34 and have tried adjusting but no luck. What can I try?

A: It sounds like humidity over time has frozen on the back plate of your kegerator and caused this problem. Unplug the iced up kegerator and open the door, and let it sit 48 hours for the ice behind and in front of the cooling plate to all melt. Then once the ice pack has melted, plug it back in, and it should cool as normal.

Ask a Question