8 Liter KegLand Mini Keg

  • Item #G39
  • Price: $59.99
  • Part #

Mini Keg Accessories

- +

In stock, will ship on Tuesday, July 5

The KegLand Stainless Steel Mini Beer Kegs are specifically designed for home brewing/growler dispensing. They are suited to small batches and suited to people who want to fit them into their home refrigerators. You can naturally carbonate using priming sugars or force carbonate and serve your beer with the optional ball lock lid (item P07, see at right).  They come with a silicone gasket sealed stainless threaded lid, so you can fill them with beer and let them naturally carbonate, or carbonate as needed with the optional P07 ball lock lid. You will be given a chance to buy this lid (you do not need a  Ball Lock Lid for every keg) when you put this in your cart.
 
These fit into a standard domestic refrigerator. The optional Ball Lock lid for these kegs use a flexible silicone dip tube the kegs can also be dispensed on their side or upright. The flexible silicone dip tube of  lid P07 is heavier than beer, and will sink to the bottom even if the kegs are on their side. The optional lid P07 are equipped with a 30 PSI relief valve, and have a maximum pressure of 45 PSI.

Kegland Mini Kegs use the gold standard acid bath electrolosis to pacify the 304 grade stainless steel making the more resistant to rust than any other mini keg on the market. These are the only mini keg that uses a special robotic technique to weld the kegs from the inside out. This means KegLand gets a superior welding finish that is more sanitary than any other mini keg available. Although there are many other mini kegs that come from China simply none have the quality and finish as the genuine KegLand minikegs. See the video below for the KegLand welding story.


This  8 Liter model is 16" tall and 7" wide. With optional Ball Lock Lid P07, it is 19.5" tall.




Jun 21, 2022 by Eric

Q: Hi, I want to put together an 8 Liter Kegland Mini Keg system, with the flow control ball lock, a mini-regulator gauge (0-30 psi gauge), with 16 gram CO2 cartridges, Pluto beer gun, and 5 feet of 3/16" ID tubing. What I'm confused about is (1) what specific Duotight connectors I'll need, and (2) if that would be absolutely all I'd need to get a working system. Thanks!

A: For an 8 Liter Mini Keg System, the following should work: 1  G39 8 liter keg 1  P07 Mini Keg Ball Lock Lid  1   X79 Flow Control Ball Lock 2   Z93 Duotight 8mm EvaBarrier Tubing Adapter 1    Z91 39' Roll of 4mm by 8mm EvaBarrier Tubing (shortest length we sell) (alternatively you could purchase 5' of J49 Clearflo tubing which is also more flexible and easier to see through) 1    Z53 Duotight  draft beer gun 1    D61 Dual Stage Micro Regulator plus B36 16 gram C02 cartridges however many you want This should be all you need. Thanks for your interest in William's Brewing.


Ask a Question