Item #: L65
Our Price: $24.99
In Stock, Will Ship On 10/17/2019.
Share |


The Brewer's Edge Weldless Thermometer takes a precision stainless steel dial thermometer, and adds a unique sliding reference pointer. Features a 3" dial and 3" probe. Just set the sliding red pointer to your reference point (say 154 F for mashing) and it provides quick visual reference that you are at your target temperature. Great for mash tun and sparge water tanks, although you do not really need a thermometer if you are just making malt extract beers. 

Easy to Install - Unlike Weldless Pot Thermometers with loose washers and O rings, The Brewer's Edge Weldless Thermometer features a unique recessed silicone O ring mount, for a positive seal in any pot. You only need to drill a 7/16" hole, the smallest (and easiest to drill hole) of any weldless pot thermometer.

Features a 60� to 220�F. range, 2� calibrations, a tempered glass lens, and a resetting screw, so you can precisely adjust the thermometer for a particular temperature range. Although heat resistant, it should not be allowed to contact open flame or come near open flame, so it must be installed far enough up on your pot to avoid being licked by burner flames.  

Click to download the installation instructions




Average Rating:
(based on 6 reviews)

Showing 1 - 5 of 6 Reviews:

Review and Rate this Item
by Pete
on 8/8/2018
from Georgia
Good thermometer
Picked up two of these when on sale at a discount. They read a couple degrees different, but I can easily compensate for that. Wasn't sure about how they would seal, since most I've seen are designed for the gasket to be inside the kettle. Drill the hole as specified, smooth all the burrs and it will seal like a champ....mine does.
by David
on 10/12/2017
from Greenwood indiana
Fast shipping, received it within 2 days. Easy to install in keggle, even without a step drill, and no leaks! One happy camper here!
by Neal
on 10/17/2014
from Woodland
great buy
Bought when the email special came out, still kicking myself for not getting 3! Super easy install, darn near calibrated out of the box.
by Matthew
on 8/27/2014
from Salida
super easy to install. doesn't leak at all. makes my brew day easier on big system.
by Thomas
on 5/24/2014
from Sugar Land, TX
Weldless Pot Thermometer
Performs perfectly. I rotate the 200 F mark to coincide with 12:00.
Review and Rate this Item
Nick Williams
7/9/2019 9:10:50 AM
Will this work in Ss Brewtech kettles?
It fits a 7/16" hole, so if this kettle has such a hole, or you can drill one, it will work.
norden cegelske
11/20/2016 2:16:08 PM
will this survive being immersed in pot cooling water? as in chilling wort after the boil???
No, it has a rubber seal around the glass, but it is not meant to be a immersion thermometer.
Ask a Question

    Email A Friend

    Send this product to a friend...