Frequently Asked Questions
Click
a link below to get to the start of the list of
questions on one of the following topics. If you do not
find your answer under one heading, it is a good idea to
try another, or scroll through the entire list of
questions in this section. If you can't find the answer
to your question here, submit a question to our Customer
Support Department ( click back to the main menu).
1.
Beginner Questions
2.
Questions on William's Brewing Kits
3.
Ingredient Questions
4.
Recipe Formulation Questions
5.
Brewing Process Questions
6.
Equipment Questions
7.
Questions On Beverages Other Than Beer

1.
Beginners
- 1.1
What do I need to start?
- 1.2
What type of beer is easiest to make at home?
- 1.3
Can I make beer without alcohol?
- 1.4
How long does it take to make a batch?
2.
William's Brewing Kits
- 2.1
What is the difference between a kit rated
beginner and one rated intermediate?
- 2.2
My kit says I should use a single fermenter. Can I
use a primary and secondary fermenter instead?
- 2.3
My William's Brewing Kit instructions say to
wait 12 days. Can I bottle sooner?
- 2.4
How long will William's Brewing Kits last before
I make them?
- 2.5
Can I get the formulation for a William's
Brewing Kit?
- 2.6 What are the
hops in my William's Brewing Kit?
3.
Ingredients
- Malt
& Rice Extract
- 3.1
Malt extract or grain, which should I use?
- 3.2
Syrup or dry malt extract, which is better?
- 3.3
How long will William's Malt Extract last, and
how should I store it?
- 3.4
How long will whole and crushed grain last?
- 3.5
Are your malts fully modified?
- 3.6
How do I use flaked ingredients? Do they have to
be mashed?
- 3.7
What is toasted malt, and how do I obtain it?
- 3.8
What is Carapils malt?
- Hops
- 3.10
Pellet, whole, or plug?
- 3.11
How do I convert a recipe using pellet hops to
whole hops or plugs?
- 3.12
How do I convert a recipe using whole hops to
pellets?
- 3.13
How long do hops from Williams last, and how
should I store them?
- 3.14
What is dry hopping? How is it done?
- 3.15
What are AAU's, HBU's and IBUs?
- Liquid
& Dry Yeast
- 3.16
Liquid or dry yeast, which should I buy?
- 3.17
Will my yeast be okay in shipping?
- 3.18
How long will my yeast last in storage?
- 3.19
My yeast arrived frozen. Is it okay?
- Sugar
- 3.20
Why use corn sugar instead of household cane
sugar?
- 3.21
Can I use sugar to increase the alcohol content?
- 3.22
How much sugar can I use before my beer tastes
cidery?
- 3.23
What is lactose used for?
- 3.24
Can I use brown sugar in my beer?
- 3.25
Can I use maple syrup in my beer?
- 3.26
Can I use honey in my beer?
- Flavorings,
Spices, and Fruit
- 3.27
When do I add William's Fruit Flavorings?
- 3.28
When do I add spices, and how much should I use?
- 3.29
When do I add real fruit, and how much should I
add?
- Beer
Clarifying Agents
- 3.30
Helping the trub settle in the boil with gypsum
and Irish moss
- 3.31
Removing yeast from the beer with Instant
Isinglass
- 3.32
Removing chill haze with silica gel
4.
Recipe Formulation
- 4.1
How do I predict the initial starting gravity?
- 4.1a
How do I convert a malt extract recipe to a grain
mashing recipe?
- 4.2
How do I predict a final gravity?
- 4.3
How do I measure alcohol content of the finished
beer?
- 4.4
How do I know how to use the right amount of hops?
- 4.5
How do I convert syrup malt recipes to dry malt
extract?
- 4.6
I need 8 lbs. of extract and you have a 6 lb.
pouch. How do I get 8 lbs.?
- 4.7
How many cups are in 1 pound of William's Dry
Malt Extract?
- 4.8
How many cups are in 1 pound of your corn sugar?
- 4.9
How many cups are in 1 pound of your whole or
crushed grain?
- 5.
The Brewing Process
-
- Liquid
Yeast
- 5.1
My William's Liquid Yeast arrived already
swollen. What should I do?
- 5.2
I made my wort, but my yeast has not swollen. What
should I do?
- 5.3
My William's Liquid Yeast was popped 4 days ago
and hasn't swollen. Is it okay?
- 5.4
My William's Liquid Yeast was popped 7 days ago
and hasn't swollen.
- 5.5
My William's Liquid Yeast has only risen ¾ of
an inch. Should I use it?
- 5.6
My William's Liquid Yeast is swollen tight and I
cannot brew today. How long will it last?
- 5.7
Should I make a yeast starter, and how should I do
it?
- 5.8
Can I use yeast in a bottle of home brew to make
another batch?
- Dry
Yeast
- 5.10
I added dry yeast two days ago and nothing is
happening. What should I do?
- 5.11
I pitched my yeast at 100° F. Will it be okay?
- Mashing
- 5.12
How should I set my malt mill when crushing grain?
- 5.13
I am taking an iodine test and it keeps changing
color. What is wrong?
- 5.14
When do I take a pH reading when mashing?
- 5.15
Does it matter what pH my sparge water is?
- 5.16
When do I add gypsum when mashing?
- 5.17
Single temperature or multiple temperature rest?
- 5.18
How do I do a partial mash?
- Malt
Extract Brewing
- 5.19
I want to use specialty grains like crystal malt
with malt extract. When and how do I add them to
the pot?
- 5.20
When making a malt extract beer, how many gallons
should I boil?
- 5.21
Should I add all malt extracts, dry and liquid, at
the start of the boil?
- 5.22
Should I worry about pH when using malt extract?
- 5.23
When do I add gypsum when using malt extract?
- Boiling
the Wort
- 5.24
Why boil for 1 hour? Why not just boil a few
minutes?
- 5.25
How can I avoid a messy boilover?
- 5.26
I live at a high altitude. Should I do anything
different when boiling?
- Cooling
the Wort
- 5.27
Do I need a wort chiller?
- 5.28
How do I get the wort off the sediment and into a
fermenter?
- 5.29
What happens if some of the sediment gets into the
fermenter?
- Yeast
& Fermentation
- 5.30
I added the yeast two days ago and nothing is
happening. Is this normal?
- 5.31
Do I need to add yeast nutrient?
- 5.32
My liquid yeast pack smells like rotten eggs when
opened
- 5.33
I added the yeast 4 days ago and nothing is
happening. What should I do?
- 5.34
My airlock bubbled for a day or two and then
stopped. Is something wrong?
- 5.35
My fermenter has overflowed the airlock. Is the
batch bad?
- 5.36
My house gets warm in the summer. How can I brew
good beer?
- 5.37
What temperature range can I ferment ale yeast?
- 5.38
What temperature range can I ferment lager yeast?
- 5.39
My airlock has been bubbling for 3 weeks. What
should I do?
- 5.40
When do I take a hydrometer reading?
- 5.40a
My starting gravity (hydrometer) reading is way to
high or low. What is wrong?
- 5.41
There are things floating in my beer. Should I
worry?
- 5.42
There is a fine white dusty film on the surface of
the beer. What is this?
- 5.43
My beer smells like sulfur. What is wrong?
- 5.44
When should I transfer my beer to a secondary
fermenter?
- 5.44a
Should I use one fermenter or a primary and
secondary fermenter?
- Bottling
& Kegging
- 5.45
How do I know if my beer is ready to bottle?
- 5.46
Do I need to sanitize bottle caps?
- 5.47
How do I artificially carbonate keg beer?
- 5.48
Will the yeast sediment in my keg beer be a
problem when dispensing?
- Priming
- 5.49
How much corn sugar should I use for a bottled
batch?
- 5.50
How much corn sugar should I use for a kegged
batch?
- 5.51
I am putting half the beer in mini kegs, and half
in bottles. How much sugar do I use to carbonate
both?
- 5.52
Can I prime with malt extract instead of corn
sugar?
- 5.53
Can I prime with honey or molasses instead of corn
sugar?
- 5.54
Can I prime with brown sugar instead of corn
sugar?
- 5.55
Can I prime with fresh wort instead of corn sugar?
- 5.56
Can I prime with maple syrup instead of corn
sugar?
- Aging
& Drinking
- 5.57
My beer has been bottled for 3 weeks but is flat.
What is wrong?
- 5.58
My beer has too much carbonation. What is wrong?
- 5.59
My mini keg is bulging. What is wrong?
- 5.60
My keg beer seems under carbonated.
- 5.61
The head of my beer dissipates as soon as it is
poured.
- 5.62
My draft beer is foamy. How can I adjust it?
- 5.63
My beer has a haze that forms when chilled. What
is this?
- 5.64
My beer has a white layer on the bottom of each
bottle. Is this normal?
- 5.65
How long does beer last when bottled or kegged?
- Taste
- 5.66
My beer tastes cidery. What is wrong?
- 5.67
My beer has a sour taste. What is wrong?
- 5.68
My beer tastes thin. What is wrong?
- 5.69
My beer has a metallic or medicine-like taste
- 5.70
My beer tastes yeasty
- 5.71
My beer has a burnt flavor
6.
Equipment Questions
- Mashing
6.1
What size sparge arm should I get for my mashing
system?
- Boiling
- 6.2
Can I use an aluminum pot for brewing?
- 6.3
How large a boiling pot do I need?
- 6.4
Cache Cooker (Outdoor Burner) Questions and
Answers
- Fermentation
- 6.5
Plastic or glass, what type of fermenter should I
use?
- 6.6
How do I sanitize your items Q38 and Q94 Foam
Stoppers?
- Kegging
- 6.7
Should I get a Mini Keg or full sized Beverage
System?
- 6.8
How long do Mini Kegs last?
- Bottling
- 6.9
Can I use twist off bottles?
- 6.10
How can I remove labels from beer bottles?
- 6.11
Are oxygen barrier caps worth the extra cost?
- 6.12
Can I bottle beer in wine bottles or mason jars?
- 6.13
Do your blue bottles protect beer from light as
well as amber bottles?
- 7.
Other Beverages
- 7.1
Can I carbonate your William's Brewing soda
extracts with yeast?
- 7.2
My cider is cloudy after 2 months. Is this okay?
- 7.3
My mead has stopped bubbling after 15 days. Is
this normal?
-

Copyright
© 1998 - 2005 William's Brewing
All
Rights Reserved
No
part of this document may be reproduced in any manner
whatsoever, without written permission from William's
Brewing.
|