Item #: B07
Our Price: $19.99
Quantity:
 
In Stock, Will Ship On 06/08/2020.

Description 

This 24" polycarbonate sight tube features a 1/2" male NPT threaded inlet, to attach to any 1/2" female NPT port on a sparge water tank or brewkettle. For this to work, you also have to have a 1/2" female NPT port on your pot. Maximum temperature 220° F.  This is 24" long (cut to size), so it can fit everything from a shorter kettle to a converted keggle.

Although this can be used in a brewing pot, it is another thing to clean. We recommend sight tubes for use with water in a sparge water tank, as cleaning is not required.

 

Reviews


Be the first to submit a review on this product!
Review and Rate this Item
QuestionAnswer
Cory
3/26/2020 8:40:31 PM
Can I just drill a hole in my keggle and use an o-ring, washer and a back nut to secure it? (Items R42, B57 and S04)
I'm not sure that will work. You would need two of the nuts, o-rings and washers installed facing each other one set on the inside and one on the outside to sandwich the keggle and I'm not sure there are enough threads for that. You could install a weldless 1/2" NTP bulkhead then attach a female coupler to the male bulkhead, then thread the site glass into the coupler. This is just a suggestion and we do not guarantee that it won't leak since it was not designed to be mounted that way.
jay
1/2/2020 8:08:08 PM
is there an option to replace the street 90 elbow with a standard 90 elbow so to attach to a weldless bulkhead fitting? Id rather not put a coupler on and be able to keep closer to HLT
We don't have that as an option. We do sell a 90° stainless female to female elbow (item E41) but we have not used it in that configuration.
Kdub
10/14/2018 8:33:16 PM
Is this fitting brass or 304 stainless steel ?
304 stainless
Ask a Question

    Email A Friend

    Send this product to a friend...