Item #: D22
Our Price: $119.99
In Stock, Will Ship On 06/03/2020.
  Rubber Gauge Protector (+ $3.99)


Featuring two 0-50 PSI regulator bodies, allowing the setting of two dispensing pressures from the same C02 cylinder. This U.S.made Taprite regulator is ideal for applications where you have one low pressure beer (say a traditional bitter) and another higher pressure beverage such as sparkling water. Set the first regulator for 3 PSI for the bitter, and second at 25 PSI to carbonate the water. Features unique pull out knobs to let you adjust the dispensing pressure easily without tools. Pull the knob out to adjust, and press back in to lock the setting. Features 2" diameter rubber diaphragms for precise low pressure adjustments.

 Fits our D03 Gas Connectors or use our D66 Barbed Adapters (two required). Unlike most beer regulators, you do not need to adapt your ¼" gas tubing to fit the 5/16" hose barb standard on many other regulators). Includes twin relief valves, one way check valves, and an integral rubber cylinder washer.


Average Rating:
(based on 5 reviews)

Showing 5 Reviews:

Review and Rate this Item
by Gary
on 5/25/2012
from Tualatin
Precise and Dependable
I've been using this for my twin keg system for almost a year now and I love the precision, even though I sometimes feel I'm turning the knob too far for a small adjustment in pressure.  It is very solid and a great value product.
by Kevin
on 2/17/2012
from Valley, WA
Good quality product
This is a commercial regulator set.  Very functional and accurate.  The guages included calibration stickers.  The knobs lock and if not put in the unlock position you could unscrew the regulator cover.  I split one regulator to supply two taps for a three tap keggerator.  I also spoke with tap-rite directly and was able to get a parts list and order additional parts with little effort.
by Allen
on 1/25/2012
from North Hollywood
Great Product
Absolutely lover the knobs on this regulator, don't have to use a screwdriver for this ever again.  This is has been great for my three keg set up.  I split the line from one regulator so I have two beers at serving pressure while I carb a third one.
by Joe
on 9/23/2011
from MA
Disappointed - Poor Holding of Pressure
Pretty disappointed.  The model I have has the knobs for adjustment.  After adjusting, the pressure will often fall or rise a few hours later, causing me to always look and adjust - rather then "set and forget".  
by M. SHANE P.
on 5/7/2010
Works great
Pros: I ordered one over 5 years ago and put it right to work in my "keggerator". Easy to hook up and adjust (as long as you keep a screwdriver near) and you've got two pressures available for different brews. 

Cons: Adjustment can be difficult without a screwdriver. Took me awhile to get the hang of proper carbonation and dispensing pressure.
Review and Rate this Item
Be the first to submit a question on this product!
Ask a Question

    Related Products

    Email A Friend

    Send this product to a friend...