Item #: J86
Our Price: $19.99
Quantity:
 
In Stock, Will Ship On 09/21/2018.
Share |

Description 

This fits snugly on a 3/8" valve hose barb, and allows you to meter sparge water onto your grain bed with the valve. The hollow 304 grade stainless steel float on the end of the  3/8" silicone hose is 2" in diameter, and keeps the hose above the grain bed so it does not dig in and disrupt the grain bed.

 To use, just put on top of your grain bed in your lauter tun, and adjust your valve until an inch of water is above the grain bed. Open your lauter tun exit valve, and keep about an inch of water above the grain bed for even sparging. Continue until you have finished sparging and then turn off.

Simpler and easier to use than a Sparge Arm, and just as effective. Fits any valve with a 3/8" hose barb (so it can be used with a wide variety of systems). The silicone hose is 4' long,and the stainless steel float features a 3/8" opening for the tubing.


Click here for assembly instructions.

Reviews

Average Rating:
(based on 4 reviews)

Showing 4 Reviews:

Review and Rate this Item
RatingReviewerReview
by David
on 12/4/2017
from WA
Prompt Shipping good quality item but..
the float ball was not used to distribute sparge water it was used to help clear the beer and it worked well.
by Ritchie Boyd
on 7/16/2017
from MARYLAND
Sparge ball float assembly
Works great , keeps water above grain bed, don't dig in  and is easy to clean, plus the price is right
by Paul
on 4/23/2015
from Ypsilanti
Easy to use and works great!
The floating ball keeps your sparge water flowing gently at the surface above the grain bed. This assembly is simple to set up and easy to clean.
by Paul
on 8/29/2014
from Napa
Sparge float ball assembly
I was a little skeptical as I really wanted something to sprinkle water evenly over the grain bed. The reviews on the rotating sparge arm were less than glowing, so for $20 I thought I would give this a try. It definitely worked as advertised. As long as one monitors the flow both in and out of the mash tun and keeps an inch of water on top of the grain bed it seems to sparge evenly. The ball, and discharge, tend to stay at the edge of the tun and erodes a slight depression in the edge of the grain bed but did not seem to get all the way through. It managed to keep an even colored layer of water over the mash for the entire sparge. I'll keep using it.
Review and Rate this Item
QuestionAnswer
Airetime
11/2/2017 5:47:47 PM
What is the size of the SS Bobber please?
2 inches tall and 2 inches wide.
Larry
8/22/2017 10:32:06 AM
What is the size of the hose, ID and OD
3/8" interior diameter, 5/8" exterior diameter.
Ask a Question

    Related Products

    Email A Friend

    Send this product to a friend...