• Snaplock 1/2" Male NPT Adapter

click on thumbnail to zoom
Item #: L79
Our Price: $4.99
Quantity:
 
In Stock, Will Ship On 07/16/2019.
Share |

Description  more details

This type 304 stainless connector features 1/2" male NPT threads to fit our Brewer's Edge KettleValve, BrewKettle, Polar Ware Brew Pots, and Blichmann Boilermaker pots. Screw this into your valve (use teflon tape) and the use Snaplock couplers to quickly connect hose to your kettle. Fits any valve with a 1/2" female NPT outlet.

Click on the more info link above to see this attached to a Brewer's Edge KettleValve. This also fits the snap lock fitting attached to the outlet of the Robobrew.

This shows the L79 Snaplock male adapter screwed into a Brewer's Edge BrewKettle valve with a L72 hose coupler and thermoplastic tubing attached. You would set it up this way if you are using a Blichmann or Shirron Heat Exchanger instead of an immersion wort chiller. L72 and thermoplastic tubing are not included, order separately.

Reviews

Average Rating:
(based on 13 reviews)

Showing 1 - 5 of 13 Reviews:

Review and Rate this Item
RatingReviewerReview
by Gregory Stephens
on 4/11/2019
from GA
No leaks with these clamps
I would give an excellent rating if solely based on function. These clamps are secure and with the pins, you have confidence nothing will fail. I ordered nearly a dozen and they came loose, wrapped together in bubble wrap. There were lots of dings and dents in the fittings from the CA to GA. They should at least be hand wrapped in a small piece of paper or bubble wrap so they don’t bang into each other. One in the set was damaged beyond use. Williams was quick to send me a replacement. Other than the shipping, they function perfectly, they all match up just fine due to the cam lock nature and do not leak. Expensive but you won’t ever replace them, best investment in long term plumbing if you system!

William's Brewing Responds:  Sorry for the problem with the damage. We have reviewed packing procedures with the packer in question and it will not happen again.  
by Don
on 12/13/2017
from Conn.
backflush wort cooler
purchased adaptor to configure back flush of wort cooler - excelent, no additional lines necessary.
by John Anderson
on 2/17/2017
from Pasadena, Texas
The best QD
These are the best QD I've found and the only ones I'll use now. Before, when I was using the "ball-lock" style, i was having issues with leaks primarily due to tiny differences in the fittings between manufacturers. Some fit super tight, some way to loose and some I had to send back because they wouldn't fit at all.  With these cam-locks, Ive actually ordered them from several different vendors and every one has fit snug as it should and haven't had one leak. Not to mention that these are a fraction of the price of the "ball-lock" style. Highly recommended. And of course, Williams shipped fast and I received them in good order. 
by Fred Fraase
on 10/27/2015
from Tacoma, WA
Brewer
After working in a small brew pub here in Tacoma I was going to go with the tri-clover fittings. But, I found these guys and now use them in my set up. Easy to clean and sanitize, great price and no welding what more could you want?
by robert
on 10/23/2015
from Alabama
luv these fittings
we have a boring machine at work and it has these kind of fittings and they work great industrially so its great to have them on my brew equipment.
123
Review and Rate this Item
QuestionAnswer
Brewpastor1224
11/20/2018 8:46:21 AM
I am curious if this will work with any NPT connection. I like the idea of quick disconnects for my all grain set up as I am looking to add a pump and need to switch hoses from pump to kettel to HLT and Mash Tun etc.
Yes, this part is male 1/2" NPT and will fit any female 1/2" NPT fitting.
Adam
9/29/2017 1:01:48 PM
Are these manufactured to milspec standards?
No, but they are excellent quality, and we have no problems with these after selling thousands.
Ask a Question

    Email A Friend

    Send this product to a friend...