Item #: P60
Our Price: $39.99
Quantity:
 
In Stock, Will Ship On 10/21/2019.
Share |

Description 

This gas distributor (with a machined aluminum billet body) featurs the home brew standard ¼ inlet and outlet hose barbs, so they will fit ¼ interior diameter gas tubing (unlike most distributors which feature 5/16 barbs for commercial beer gas hose).

Great for distributing gas from a single regulator to 6 kegs. Check valves are included on all 6 outlet valves, to prevent beer from backing up into the distributor. On the aluminum billet body, the end opposite the inlet barb is plugged with a ¼" male NPT plug. This can be removed and another brass valve or part like our Q87, D16, or D69 (at left) installed. 13.5" long.

Reviews

Average Rating:
(based on 3 reviews)

Showing 3 Reviews:

Review and Rate this Item
RatingReviewerReview
by Joe
on 9/17/2018
from Saco Maine
Great Manifold
I was so glad to find this manifold, it is much better than the brass ones i had screwed together.  I do not expect these to crack for no reason as they were torqued to the correct level at the factory, not by me with no torque specifications.  

by David
on 5/12/2017
from Colorado
Great price, not so good engineering
At $40, this 6 valve manifold is a great deal.  When I received it, however, I noticed the machining was poorly done:  in particular, none of the 6 valves were set perpendicular to the main body of the manifold--all were tilted a few degrees.  While I doubt this will impact the performance of the valves, it makes me wonder...
by Lance McNulty
on 4/15/2017
from Oregon
Great
Solidly built and easy to install
Review and Rate this Item
Be the first to submit a question on this product!
Ask a Question

    Email A Friend

    Send this product to a friend...