Item #: P61
Our Price: $9.99
Quantity:
 
In Stock, Will Ship On 07/22/2019.
Share |

Description 

This stainless gas side fitting screws onto the gas in fitting of any Sanke coupler, and converts it to accept gas ball lock fittings. Makes it really easy to switch between a commercial keg and a ball lock home brewing keg. This is just the horizontal gas side, you will need to order P62 (beer side which goes on top) in order to make both sides of your Sankey coupler ball lock.

Includes inner sealing washer. To prevent leaks, tighten by hand firmly, and then use a wrench to tighten 1/4 of a turn. Overtightening will distort the inner sealing washer, causing leaks.

Reviews

Average Rating:
(based on 15 reviews)

Showing 1 - 5 of 15 Reviews:

Review and Rate this Item
RatingReviewerReview
by Matt
on 2/3/2019
from OR
Works
Works well. Makes it easy to swap keg types.
by Fred Fraase
on 1/17/2019
from Tacoma, WA
Great fitting!
I no longer have to cut off tubing going back and forth from commercial kegs and my corny kegs! 
by Johnny M
on 11/7/2018
from Colorado
Perfect
I bought this and the beer side adapter and am happy with the whole set up. Every once in a while I will pick up a keg of microbrew to accompany my homebrew. With these adapters, I no longer have to remove the ball lock fittings to attach to the sankey tap. Quick and easy!
by Jim
on 11/15/2017
from Kansas City
Best price I could find.
About the best price for these--some retailers really gouge you for them. Shipping was reasonable and fast.
by Timothy
on 10/3/2014
from Fort Collins
works great
after building a keezer and being set for 3 ball lock kegs, there was a party coming faster than my beer was going to be ready - way to go williams with the sanke converter to dispense a keg of commercial beer mmmmmm
123
Review and Rate this Item
QuestionAnswer
Sam
9/6/2018 10:32:25 AM
Will both this one and the liquid side converter work on Type S Couplers?
Yes, they will work on all the couplers we sell.
Brian
4/13/2017 11:01:20 AM
I see the Sanke couplers you sell have hose barb gas side fittings. Will this work with either of them (are the hose barbs removeable)?
Yes, the hose barbs come right off the inlet gas side when you unscrew the nut, and then you screw this converter onto the threads.
Ask a Question

    Email A Friend

    Send this product to a friend...