Item #: P62
Our Price: $9.99
Quantity:
 
In Stock, Will Ship On 05/23/2019.
Share |

Description 

This stainless beer side fitting screws onto the top beer out fitting of any Sanke coupler, and converts it to accept beer (liquid) ball lock fittings. Makes it really easy to switch between a commercial keg and a ball lock home brewing keg. This is just the top beer side, you will need to order P61 (gas side) in order to make both sides of your Sanke coupler ball lock.

Includes inner sealing washer. For best results, hand tighten firmly, and then tighten a quarter turn with a wrench (overtightening will distort the inner sealing washer).

Reviews

Average Rating:
(based on 16 reviews)

Showing 1 - 5 of 16 Reviews:

Review and Rate this Item
RatingReviewerReview
by Matt
on 2/3/2019
from OR
Works
Performs the job as advertised. Makes it easy to swap between keg types.
by Johnny M
on 11/7/2018
from Colorado
Works Great!
I bought this and the gas side adapter and am happy with the whole set up. Every once in a while I will pick up a keg of microbrew to accompany my homebrew. With these adapters, I no longer have to remove the ball lock fittings to attach to the sankey tap. Quick and easy!
by Jim
on 11/15/2017
from Kansas City
Excellent price on a well made part
About the best price for these--some retailers really gouge you for them. Shipping was reasonable and fast.
by Ryan
on 9/22/2017
from Atlanta
Great
I'm glad I got this, I makes a commercial keg so much easier to use in a kegerator that's mostly for homebrew. Watch the keg king keg coupler YouTube video for a good guide on how to use this along with a lot of other good info.
The video says there's no need to use the washer from the keg coupler since this adapter has a washer, however, I found this adapters washer is too squishy and I had to use both to form a seal. Worked perfect after I used the washer from the coupler.
by Mike G
on 11/3/2016
from Fairfield CA
PERFECT !!!
I Ball Lock Kegs but received a free commercial Sanke 5gal keg and set up my bottle filler and filled (2) 1.5gal Tap a Drafts and (11) 22oz bottles so I could give them away. No leakage what so ever. I did use some Teflon tape because of the previous reviews and followed the instructions and hand tighten but did not go an addtl 1/4 turn with the wrench because of the tape, it was 1/8 of a turn. 
Thanks for the 2 day delivery
1234
Review and Rate this Item
QuestionAnswer
ethen
1/1/2017 1:46:25 PM
What is the thread size on this? I'm looking for a 1/2" NPT.
The thread size is standard beer nut thread size, which is 7/8-14.  This is not 1/2" NPT.
Ask a Question

    Email A Friend

    Send this product to a friend...