Six Valve 1/4" Barb Gas Distributor

  • Item #P60
  • Price: $39.99
  • Part #
- +

In stock, will ship on Monday, August 2

Share |

This gas distributor (with a machined aluminum billet body) featurs the home brew standard ¼ inlet and outlet hose barbs, so they will fit ¼ interior diameter gas tubing (unlike most distributors which feature 5/16 barbs for commercial beer gas hose).

Great for distributing gas from a single regulator to 6 kegs. Check valves are included on all 6 outlet valves, to prevent beer from backing up into the distributor. On the aluminum billet body, the end opposite the inlet barb is plugged with a ¼" male NPT plug. This can be removed and another brass valve or part like our Q87, D16, or D69 (at left) installed. 13.5" long.

Average rating 8.66666666666666 out of 10 ( based on 3 reviews )


Review by Lance McNulty on 4/15/2017

Solidly built and easy to install

Great price, not so good engineering

Review by David on 5/12/2017

At $40, this 6 valve manifold is a great deal. When I received it, however, I noticed the machining was poorly done: in particular, none of the 6 valves were set perpendicular to the main body of the manifold--all were tilted a few degrees. While I doubt this will impact the performance of the valves, it makes me wonder...

Great Manifold

Review by Joe on 9/17/2018

I was so glad to find this manifold, it is much better than the brass ones i had screwed together. I do not expect these to crack for no reason as they were torqued to the correct level at the factory, not by me with no torque specifications.

Write a Review
Ask a Question