Item #: D26
Our Price: $39.99
We are currently out of stock. Enter your email below to receive a back in stock notice.
Email me when this is available 
Share |

Description 

This chrome-plated brass beer faucet features a ball-lock mount that quickly attaches to the beer side of a keg. A spring-loaded faucet lever closes the faucet as soon as the handle is released, preventing the spilling of beer. Mount on any keg for a portable and professional beer tap. Great for parties. Disassembles for cleaning.

Reviews

Average Rating:
(based on 3 reviews)

Showing 3 Reviews:

Review and Rate this Item
RatingReviewerReview
by Andrew Z.
on 8/30/2017
Great Faucet for On-the-Go
I purchased this faucet a couple months ago and have used it on two kegs of homebrew at two separate parties. I have pin lock fittings so I just took off the ball lock disconnect and attached one of my pin lock liquid disconnects instead.  

I carb and serve my kegs at around 10-12 PSI to keep my system balanced. So, in order to prevent foamy pours with this faucet, I vented the headspace in the keg, set my serving pressure to 3 PSI, reattached my gas line, and then attached this faucet. Both times I have used it my beer has poured very well and I have not had any foaming issues.  Also, despite the serving pressure being lower than carb pressure for several hours, I did not notice any decrease in carbonation within the beer. Once I got the kegs back home, I set my regulator back to carb pressure.

Overall, this is an excellent faucet for serving a keg at a party, wedding, or any function. It also looks neat and isn't as cheap a solution as a picnic tap. I highly recommend it!
by Douglas
on 7/24/2013
from Redwood City
Good faucet
This is a solid faucet. I use it in a fridge on a 2.5 gal keg. 

Pros: easy to attach; like the self-closing function
Cons: don't know if it's the cold of the fridge or the viscosity of the beer, but the self-closing function gets sticky after about a week requiring me to remove, clean and sanitize it before I run into an issue with not being able to shut it off. Also wish Williams would finally get the growler filler that they sell (but is never in stock) for this type of faucet.
by Bill
on 4/14/2013
from Monument, CO
Excellent faucet
This works way better on my 2.5 gallon keg than the picnic faucet and hose I was using, is easier to clean and will last far longer. Well worth the extra cost.
Review and Rate this Item

Other Items In This Category

QuestionAnswer
Andrew
8/2/2017 10:12:08 AM
Hi, What is the proper CO2 regulator setting to dispense a beer with this? Would you carb at desired level and then drop regulator to 2-3 PSI to serve? Thanks.
3 psi is a good starting point and should work well as a dispensing pressure.  You can always adjust a bit higher or lower if needed.
John
1/5/2017 8:52:33 AM
Do you offer a fitting that will fit on a Pin Lock keg?
You cold also purchase item D36 (CMB beer pin lock threaded disconnect) and use it in place of the included ball lock fitting. We cannot make custom fittings though.
Ask a Question

    Email A Friend

    Send this product to a friend...