Rating | Reviewer | Review |
|
by Jim Coleman
on 11/2/2019
from Marion, MS
|
So my two brew days so far have been uneventful. My first recipe was a honey Kölsch pre made all grain kit. The OG was to be 1.048 at 75% efficiency per the kit. My OG was 1.058. So far samples pulled as I enter secondary fermentation are excellent. This is going to be a good one. The second kit, hefeweizen, also made it to the fermenter with no hitch and above predicted OG. I think the recirculating pump really helps mash efficiency. I also like that I can use the pump to move to fermenter after boil.
Things that could be better would include controls at bottom of device. If I elevate to make it easier to see and access, then it gets sketchy lifting the mash to Sparge (need step stool). The grainfather looked better in this regard. I don’t really miss the Bluetooth features and I certainly do not miss the price difference.
|
|
by Mike
on 8/18/2019
from Michigan
|
If you have never brewed before, this would be a great start. Easy to use and comes complete.
|
|
by BOYD
on 8/17/2019
from CLINTON
|
I gotta say, this Brewzilla does not disappoint. 20 years as an extract brewer, and I just started all grain brewing last year. I really think this piece of equipment has cut my brewing time in half. I had a bit of an issue with the first one I ordered, but the staff of Williams Brewing took great care of me! I am a customer for life. :) I like the fact that I can program a start time to heat up my water so I am ready to go when I want to brew. Did a test brew this last weekend and everything went great. Looking forward to brewing more often!
|
|
by Eric Peterson
on 8/6/2019
from Tennessee
|
20 years of extract brewing, finally decided to try Robobrew with 10.5 lbs grain and a brown ale recipe. Checked water volumes beforehand, adjusted accordingly (uniformly low approx. 2 qts/ 2 l). Pre-heat: great! Mash-in: clogged the recirc pump when trying to hydrate the grains; cleared in 30 sec with a bit of lung work! Mash temp held well with neoprene jacket; as advertised, bottom temp 2-4 deg F off wort above upper screen. Recirc slow, overflowed into siphon a bit—don’t forget, small diameter end fits atop the siphon tube! Sparging: very slow, but I have nothing to compare as an extract brewer—25-30 min. Approx. 35 min to boil with both elements on. Held the boil well; 2 oz hops w/o bag or spider gave no run off clogging—might hesitate to hop more w/o one or the other. Clean up-really my only complaint: nothing in instructions or on the .au website/blog.
All in all, very easy to use, well made, easy to assemble, and a reasonably priced entry to all grain! Enjoy
|
|
by Robert Hansler
on 7/11/2019
from NY
|
4 brews so far, all came out as expected. Unit is easy to setup, use and clean. Had no issues with the provided immersion cooler as others have indicated. There are many You Tube videos on the Robobrew recommend watching several of those to get tips on use.
|
|