• Riptide™ Brewing Pump

click on thumbnail to zoom
Item #: L32
Our Price: $199.99
In Stock, Will Ship On 07/07/2020.


  • High performance curved blade impeller and strong rare earth magnets deliver 7 GPM and up to 21ft of lift
  • Tri-clamp head connection fully disassembles in seconds for easy cleaning
  • 1/2" NPT inlet and outlet connections
  • Totally enclosed motor is splash proof and super quiet (50 dB)
  • Integral linear flow valve for superior flow control - don't spend more money for a separate valve and fittings.  
  • Integral air vent valve and partially enclosed impeller design allows you to prime the pump in seconds 
  • Stainless steel head rotates 360 degrees to fit in virtually any installation
  • Large stable base with protective rubber feet keeps the pump from tipping - a $25 retail value included
  • Convenient power switch on the base
  • Includes a 10ft long cord with plug (120V)
  • Base acts as a cord wrap for convenient storage
  • Assembled in USA from USA and imported components
Important Safety Notice: This pump, like all 110 volt items that run in potentially wet areas, should be plugged into a GFI protected outlet for safety.


Average Rating:
(based on 3 reviews)

Showing 3 Reviews:

Review and Rate this Item
by Josh Wade
on 1/16/2019
from Las Vegas
Great Pumps!
These pumps are BEASTS! I got a pair of them to replace some old chugger pumps that were having constant impeller issues and I am not disappointed. The MT recirculation flow through my 50' herms coil has improved dramatically, which helps save time with the initial filling of the MT as well as cleanup time. The built-in linear flow control valve is also very nice to have. I still use a ball valve at my kettle inputs to initially slow the flow but I fine tune the flow with the linear flow valve.

Please be aware that tightening the TC clamp too tight will cause the impeller to squeal at mid to high temps. It only needs to be tight enough to create a seal, do not over tighten...

I took away 1 star because of the bleeder valve. It should have been designed better. The bleeder valve needs a towel and a bucket to avoid making a mess, but that isn't a huge deal for me. Just make sure you DO NOT bleed the air while the pump is on. Thats just asking for water/wort to be sprayed everywhere. 
by Steve
on 5/31/2018
from Portland, OR
Worth it!
This is a great pump.  Plenty of power, with several great design features specifically for the home brewer.  I especially like that it's splash proof, has an on/off switch, is easy to clean, and has a highly adjustable output valve.  The air vent valve is great for priming, which elegantly takes care of what otherwise is the real Achilles' heel of mag drive pumps.
I love this pump.  I'd sleep with it, if my wife would let me.
by James Shreve
on 1/1/2018
from Alaska
I ordered two Riptide Pumps for install with my HERMS System I just finished building out. I love these pumps, not only do they have great pumping rates and fully adjustable for moving or circulating my water and wort, they are also surprisingly quiet. I would definitely recommend this pump!
Review and Rate this Item
6/6/2020 8:55:50 AM
Will this pump run ok on 110v (Japan)?
Japan has 100 volt current so this pump may run a little slower. We also do not recommend continuous operation as the pump may overheat on only 100 volts.
12/5/2018 7:48:28 PM
I did not see a temperature rating for the Riptide, what are the temperature limitations of the Riptide?
It is safe to pump liquids up to 212 F.  Ambient temperature should never exceed 125 F. 
10/9/2018 6:36:02 PM
How many hours at one time can the pump run for or reccomended for
The pump can run for two hours at a time easily.
5/15/2017 8:56:52 AM
Hi, What is the max. flow and the power in watts?
7 gallons per minute is its maximum output, and it uses 1 amp at 115 volts (115 watts)
Ask a Question

    Email A Friend

    Send this product to a friend...