• Reactor Keg Lid Carbonation System

click on thumbnail to zoom
Item #: V10
Our Price: $39.99
We are currently out of stock. Enter your email below to receive a back in stock notice. More stock should arrive on: 7/1/2020.
Email me when this is available 

Description 

Make your own soda water on tap at home.  KegLand has invented this easy to use lid that attaches to a standard ball lock keg. You can use any ball lock keg with an oval lid.

 All you have to do is:
1. position the keg inside your fridge, kegerator, coolroom or anywhere cold (the water must be 40° F or lower, lower temperatures faciliate faster and more complete carbonation).
2. Attach your dispensing tap of choice to the soda water out post.
3. Attach your gas to the gas in post.
4. Set your CO2 regulator that is connected to the gas post to 30-50psi. (higher pressures will give you more carbonation so set your regulator pressure to achieve desired carbonation level). NOTE: It's recommended to use a check valve in your CO2 line. We recommend this duotight check valve or this one that is integrated into the gas ball lock disconnect.
5. The first time you use this unit it's a good idea to purge the air from the headspace of the keg. To do this pull the PRV on the keg lid about 5 times for 2 second bursts.
6. Connect the mains water to the water inlet post on the lid of the keg. We recommend using a check valve for this application to prevent soda water going back into your house main supply.  Also check your house water pressure, this unit works best at pressures under 45 PSI. For higher water pressures, the use of our Inline Regulator item C11 or other water pressure regulator (check with a plumber) will be needed.

This unit will give you continuous soda water connected to your house tap water. Great for a bar cafe, restaurant or just at home. This is capable of carbonating 2 gallons per hour if you have sufficient ability to cool the water. The colder the water and the higher the gas pressure (from step 4) the higher the carbonation level you will have. If you want to have higher soda water production speeds you can pre-chill the water by having one (or several) kegs placed inl ine in front of the carbonation reactor equipped keg. This will help pre-cool the water before it enters the carbonator.

Note: To avoid cleaning issues, it is recommended that the Reactor be used for water only.


Reviews


Be the first to submit a review on this product!
Review and Rate this Item

Other Items In This Category

Be the first to submit a question on this product!
Ask a Question

    Email A Friend

    Send this product to a friend...