• A close up of the control panel
  • Gallon markers from 3 to 8 on the inside, accurate to .2 of a gallon
  • The grain pipe and its components
  • The included stainless chiller is very basic and does NOT include needed ½" interior diameter tubing
  • This shows the unit filled with 4 gallons of water (the marks are slightly off)
  • There are spot weld marks on the interior where the handles attach
  • Sometimes the ribbon cable comes loose during rough shipment

click on thumbnail to zoom
Item #: B72
Our Price: $479.99
Robobrew Options

In Stock, Will Ship On 04/26/2018.
Share |


The Gen 3 Robobrew with Pump from Kegland features a recirculation pump with an on off switch, as well as a false bottom and grain pipe to both protect the pump from clogging, and hold the crushed grain above the bottom for good wort circulation. The Unit holds  9 gallons, although we do not recommend boiling more than 6½ gallons (perfect for 5-6 gallon batches). The grain pipe (basket) holds up to 18 pounds of crushed malt, and a pipe with silicone hose on top feeds the recirculated wort from the pump evenly on top of the grain bed.  Runs on any GFCI protected 110 volt plug with at least 15 amps.

 Something like an economy Grainfather, the Robobrew has an electronic thermostat that lets you set temperature and also has a delayed start feature, so you can program it to turn on up to 23 hours in advance, handy when you want hot strike water when you return home from work.  Multiple temperature rests can be programmed in at the start of mashing, see the pdf instructions below for full details.

 The Robobrew also includes a simple stainless immersion wort chiller with ½” hose barb outlets, although you need to provide the water in/out hoses and fittings (see our Robobrew Chiller Tubing Kit at right, available as an option above).

 The system includes a Digital Backlit Temperature Control and Display, Malt Pipe, Dual Element Heating (500 and 1000 watts for 1500 watts total), a stainless ball valve with ½ threads to accept any NPT accessory, and a Magnetic Pump installed in the base.  A great deal on a recirculating electric system that will work anywhere you have a suitable 110 volt plug.

NEEDED, BUT NOT INCLUDED: ½" Interior diameter tubing (usually 10 to 15') to connect the immersion wort chiller to your water source and hose attachment fittings. We have an optional kit for this, and you can check the option box above to order this kit when you place your order.

NOTE: Silicone tubing for the recirculation pump is included.

We highly recommend you read the current instructions before ordering as they are more up to date than the printed instructions included with the Robobrew.   Please click on the pdf below.

     Click to download the current instructions in pdf format.




Average Rating:
(based on 40 reviews)

Showing 1 - 5 of 40 Reviews:

Review and Rate this Item
by Chris
on 4/20/2018
from Winnebago,IL
Will help produce better beer!!
Absolutely love the Robobrew! It is user friendly and helps me hit mash temps every time. Heats water to strike and boiling temps much quicker than I anticipated. Excited to use the Robobrew, and I believe it will help me learn to create better beer.... and who doesn’t want that?!?!?!
by Seth G
on 4/17/2018
from CT
Great New Brew Kettle
Really enjoy using this.  Was using a grainfather before at a friends house and i feel for half the price this is an even higher quality product.  The pump works better and the fittings and features exceed that of the grain father.  The controls are easy to use and and the extra features such as handles on the glass lid and the kettle spout and false bottom really push it over the top.  Thanks williams brewing for great customer service as well!  
by Kevin
on 4/14/2018
from Athens
Better than expected
I bought this economical 120v for the convenience of being able to brew indoors during the brutal cold Wisconsin winters which seems to be never ending this season. After reading many reviews and comparing the pros and cons with going to 240V, I decided this would give the best bang for the buck buying through Williams brewing. I got this shipped very fast and received it via FedEx on a Saturday, brewed an all grain batch Sunday.  

I made a Dead Ringer All Grain with almost 13lbs of crushed grains and while it fit, I had to adjust by adding more water per pound as it was quite thick at first. Long story short, this thing did the trick. plenty of head space, easy to figure out and use, heats up relatively fast and even has an impressive boil maintained with just the 1000W element powered up. I experimented with both on and it can be quite vigorous with the 500W also on but not needed. The pump works nice too. No complaints and next I'm going to try just doing Extract. Use a hop screen!
by Jon
on 4/4/2018
from Seattle, WA
So far, so good!
My unit arrived safely and showed none of the damage I've seen on other people's units. I cleaned it up and just brewed my first batch on the Robobrew this past weekend, and ran into no issues whatsoever (except that I definitely don't have a hose connection in my apartment like I thought I did, so I need to make a trip to the hardware store). 
by Rich
on 4/4/2018
from Georgia
Great product, got one brew day under my belt and it went fantastic.  Very efficient, very easy to use and very easy clean up.
Review and Rate this Item
4/15/2018 12:55:35 PM
Do you stock the parts to convert my older model to the cam lock couplers on the spare arm
Jeff S
1/25/2018 3:53:04 PM
In your opinion which is the better choice, the Robobrew or the Mash and Boil unit? I realize the Robobrew has a pump but it wouldn't be too difficult to utilize an after market pump for the same purpose. Please answer via email Thank you!!
Jeff:  The Mash & Boil is simpler and a little better quality, the Robobrew features a built in pump.  If you must have a pump, the Robobrew is the way to go, but if you are used to single temperature mashing like in a rubbermaid cooler, the Mash & Boil is easier to use.
12/20/2017 3:06:43 PM
What are the dimensions of the RoboBrew?
33" tall with recirculation arm installed, 26" tall without arm, 13" wide.
Dave K
10/30/2017 3:57:10 PM
Do you sell replacement silicone sparge arm seals that are used with the robobrew system?
they are item X07
Ask a Question

    Email A Friend

    Send this product to a friend...