Dec 31, 2025 by Karl Rode

Q: Can I use 5/16” ID beer lines with the Nukatap 3 tap tower? I will need 25’ of line per tap with 12’ of gravity, so, by my calculations that would be 16PSI for 5/16” lines and 61 PSI for 3/16” lines.

A: 25' lines are more than we have tested but your resistance calculations are correct. The tower comes with 4mm by 8mm beer tubing which you would not use. The largest EvaBarrier tubing we have that will fit the shanks in this tower is our item C61, which is 6.5mm in inner diameter. You would also need larger reducers to add tubing C61 to the tower shanks, this would be our item C55 (one reducer C55 per faucet).

Aug 11, 2024 by Chuck

Q: So how do you hook up the 3 gas lines to a single gas regulator

A: The Nukatap Tower includes EvaBarrier beer and gas tubing, and includes DuoTight T fittings so you can manifold the gas line from 1 from the regulator to 3 for the taps.

Apr 15, 2022 by Stephen Gabriel

Q: Is it possible to get this tower but with only 1 tap assembly? I already have a 2 tap tower and wanted to upgrade to a third so I only need the 1 faucet assembly and lines and the 3 hole tower. I didn't see a 3 hole tower listed on your site by itself.

A: At present we only sell these with taps included. We will look into this for the future.

May 03, 2021 by John

Q: Is there room in the tower for a coldtower cooling line? They seem like a complete package - is there anything else I need to install it?

A: Yes, there is room for a cooling air pipe like the one that is included in our Tower Cooling Kit item Q61. It is a 3" diameter tower, so you have at least and inch and a half of space to play with inside the tower as far as installing a cooling pipe.

Aug 11, 2020 by Brandon

Q: How are the 4 attachment holes positioned relative to the faucets? Are they aligned with the middle faucet or more inline with the left and right faucet? Seeing if I can reuse my existing holes without the tower being rotated.

A: They are more aligned with the left and right faucet holes.