Sep 25, 2017 by Pete

Q: Does the lid that comes with the Mash & Boil have a gasket? Just wondering if I can drill a hole in the stock lid and install a stopper and airlock/blow-off tube.

A: No it does not, it comes with a lid that fits the top, but is not gasket sealed.


Sep 20, 2017 by Don Palmer

Q: I see the Mash&Boil now has cover clips and a Optional Distilling Lid. Can these clips be bought separate?

A: No, these are welded onto the new Mash & Boil.


Sep 14, 2017 by Jeff

Q: Hello, Do you think there would be a problem with the mash and boil sharing an outlet (separate plug same outlet) with a robobrew or grainfather? Thinking of using it as a vessel for sparge water.

A: If you set the Mash & Boil at its minimum setting, 1000 watts, it will use about 8.5 amps. A Robobrew or Grainfather at full power (1600 watts) uses about 14 amps, so combined, this is too many amps for one circuit and is not recommended.


Aug 29, 2017 by Bob

Q: Can the mash and boil be used to do extract also?

A: Yes, but you will need to turn off the unit when mixing the malt extract in, to prevent the syrup from burning on the bottom. So you would get the water boiling, turn off the power, stir in the syrup, and then when the syrup is completely dissolved, turn it back on again.


Aug 25, 2017 by Jeff

Q: Hello, How long is the cord that comes with it? What happens if you don't use a GFCI outlet but just a regular three prong outlet? How heavy is the mash tube when saturated with grain? Does it need two people to pick it up?

A: The cord is 5'. It will work without a GFCI but safety will be compromised. The grain basket weighs about 37 pounds when you lift it and twist to start sparging, and is not hard to lift with one person. PS: We are currently out of stock, but will have more around September 4th.


Ask a Question