Jun 17, 2017 by Zak

Q: Will the kegerator hold a 1/4 keg and a 1/6 at the same time?

A: It will not hold a standard width 1/4 barrel which is 16.5" in diameter and a sixth barrel, which is 9.25" in diameter at the same time, as the 1/4 barrel is too wide.


Jun 08, 2017 by Michael

Q: Will this unit fit a 15 gallon keg typically purchased from a distributor?

A: Yes, you will also need a sanke coupler to connect the commercial keg to the lines inside, this is our item B70.


Jun 02, 2017 by John

Q: Any hose clamps included? Threaded barbs?

A: Clamp style hose clamps are included, threaded barbs are not as the ball lock fittings are not included with this if you want to dispense home brew kegs. The clamp style hose clamps need to be bent tight with a tool like a wirecutter.


Apr 23, 2017 by Marc

Q: For the two tap tower that I just received, can I use a Kegco KC YH-762-2 double gauge regulator with splitter that I already have rather than the MK3 regulator and the barbed gas splitter that my Mark 4 kegerator came with?

A: You should be able to use any regulator with the Mark 4.


Apr 17, 2017 by Jim Minkel

Q: So, if I understand correctly the multi-tap towers all dispense at the same pressure. If correct, can I daisy chain more Keg King regulators to be able to serve three beers at different dispensing pressures? Thank you

A: It is not ideal to daisy chain the keg king regulators since they are very hard to take apart. A triple regulator would be the ideal way to do this.


Ask a Question