Dec 17, 2019 by Jake

Q: I just Bought a Cannular from you and it was delivered yesterday. Are these supposed to be ready to seam out of the box with the 500ml cans? I haven't been able to get it to seal properly, and gone through about 25 cans.

A: If you are having trouble with seaming the Kegland 500ml cans, you may need to adjust the height of the can platform, which screws up and down. There are lots of good videos on YouTube on any fine adjustment you might need to make. https://www.youtube.com/watch?v=TWDn_a2wc7U


Jul 29, 2019 by Alan

Q: Can it be powered with a 12 volt battery trickle charger?

A: We are not sure, it would depend o the model of charger and power output.


Jul 25, 2019 by John Musso

Q: I own a bosche anniallator 24 volt cordless hammer drill that runs on 24volt 3 amp hour batteries.Will the canner run on those without any issues?

A: It will run on your 24 volt DC tool batteries. It can sometimes be hard to get the alligator clips on the optional power lead to attach to drill batteries if they have smooth contacts (no place for the alligator clip to grip).


Jul 25, 2019 by Dwight

Q: Can you can condition with this setup? If so, what sugar ratio do they suggest and are there any special steps?

A: Yes, we have used 4.5 ounces of sugar by weight for 5 gallons of beer. Make sure the beer has completely fermented out before canning - we recommend always using a secondary fermenter, and leaving the beer for a few extra days before canning, just to minimize the possibility of canning beer that is still fermenting.


Jul 25, 2019 by Mike Ultee

Q: Does this canner do counter-pressure filling with a CO2 tank hook up? If not, does it have a mechanism to flush the can with CO2 just prior to filling, like a beer gun?

A: No, although you can use something like Blichmann Beergun to fill your cans before sealing, or use the natural carbonation method (priming the beer before canning).


Ask a Question