Average rating 8 out of 10 ( based on 18 reviews )

Working Great for my Application!

Review by Marco on 8/2/2022

Keep in mind that I only use this for seltzer water. After over 10 years of carbonating one liter of water every day before dinner, I decided to spend some money and upgrade to a keg and tap. I learned a lot in the process, including the fact that the flow rate has to be limited to prevent losing all my fizz just from the pour. Being a mechanical engineer, I fully understand how long lengths of tubing will slow the flow, but I wanted something sleeker and read up on this device. It works great, although I have not yet pondered how it does what it does, but I also haven't compared it to using many feet of tubing. It is/was easy to attach to my keg posts. No issues at all with fit (the keg is brand new, so that might be why-- perhaps the OD standard changed over the years (?)). Machining work looks fine, especially for the price. No sharp edges. Overall I'm very pleased with it.

Must Have

Review by David K on 5/17/2022

Best for high carb mixed drinks in a keg. Adjust for a smoth flow from tap to glass.

Problems attaching?

Review by brian on 11/18/2021

I'm surprised there are no reviews on how impossible it is to get this attached to a keg. Tried 3 different ball locks and can't get it seated even with almost all my weight on it. William's Responds: This fits KegLand and other modern kegs, but can be a tight fit with some older models.

Very impress

Review by Allan on 11/18/2021

I was just gone through the first keg with this thing. It works well. I was pushing the beer out at 15 psi and have zero issues with foaming.

Restricts flow, allows for high carbonation.

Review by Makas on 6/18/2020

I've been fermenting cider for about a year now and started kegging about 6 months ago. With a picnic tap, I wasn't able to get anywhere near the carbonation level I wanted without losing most of it to foam and waiting for that foam to die down a few times in order to fill a pint. With this flow control ball-lock, I can dispense at high pressures with no problems. So far I have had no issues with leaks or otherwise on all three that I ordered. Also these have a nice etched + and - indication on the top of the thumb screw. They are a bit taller than plastic ball-lock connectors, so be sure you have a little extra space.