(10)
Average rating 7.8 out of 10 ( based on 10 reviews )

Purchased for GrainFather

Review by Scott B on 10/29/2019

Haven't tried a brew yet so don't know if I'll have the floating problem, but otherwise fits the Grainfather nicely. As several reviews mentioned the pull ring is too large and pushes on the bottom of the basket (not just a little, it's at least 1/2 inch too tall). I solved that by popping into the hardware store and just getting a smaller eye bolt. So, now it fits perfectly, doesn't touch the basket, and I still have something to grab onto to remove it.

Robobrew False Bottom

Review by John D on 9/8/2019

Used on Grainfather. Filter is too light. Just doing a boil the filter rises up. Slowly stirring the wort when adding hops makes it rise up even more. Seems to also slow down getting up to a boil.

Great accessory for Grainfather

Review by T McGloine on 8/24/2019

Initial brew with this added to my Grainfather showed great results reducing the hop and trub from clogging the tiny GF filter.

Robobrew false bottom

Review by Charles on 8/23/2019

The false bottom works good. The ring doesn’t work well at all. It hits the bottom of the grain basket. And if you leave it out it leave a large hole than the other holes in the false bottom.

Purchased for GrainFather

Review by William Fisher on 3/21/2019

I bought this so I could eliminate the current undersized filter. Very tight fit, works as expected. I did need to reverse the loop in the middle, as it was pushing in on the grain basket. The thickness of the stainless steel is sufficient, but kind of flimsy. Definitely an upgrade to my system. Had good flow from pump the entire brewing session. I would buy again.