(12)
Average rating 7.83333333333333 out of 10 ( based on 12 reviews )

Not Good had to Return

Review by Joe Stewart on 5/12/2021

So I am an auto mechanic by trade so I understand machinery and setup. This machine required mulitiple hours of setup and still did not seal cans properly. I have had solid luck with all other Kegland products but this one needs some work as another reviewer put it. It was not able to produce a consistent seal afer hours I finally gave up and returned it. Maybe my machine was just a dud but it did not work and I gave it every effort. Thanks to the Williams Brewing Team for a seamless return process. These guys are great!

Glad to have it.

Review by Tim on 9/27/2020

Like most of you looking for a can seamer, I did my research and landed on this one. So you dont have a lot to choose from but there are a few. Will this take some set up time? Yes. Get online watch the kegland videos and down load the manual on how to set it up. No instructions were in the box. Is it loud? Yes, but managable. You will need a splash guard, but you might want to modify the one you can buy for this seamer. You could just use a large bar towel maybe. I have used the 500ml cans and they work thats a lot of beer. Now looking into finding a way to use 12oz cans not the 330ml. So this will take a new table (white part) to hold the can. With the money I saved by buying this one I can buy so many more cans.

Game Changer

Review by Erik on 5/17/2020

Simple to set up and operate right out of the box. Would also recommend splash guard depending on your canning location. There is always some minor amount of spray when canning, whether from foam or starsan. Wipes down easy for cleaning. The metal housing appears to block/trap the spray so that it drips on the exterior of the machine versus inside the housing. No adjustment needed for can fresh- knocked out 20 big boys right out the gate. Quality appliance. Game changer.

Update - Power Supply Help

Review by Nathan Chapman on 1/13/2020

So when I received this device, I ultimately couldn't get any cans to work.From the factory it should come correct and working and mine did not. I calibrated it to specs and I finally got it working for a short time. A couple of weeks ago I went back again and sure enough, my canning was not working right, kept playing with it and after about 10 or so cans, got a can or 2 to work. Now my power doesn't even come on at all. Not sure if the power supply went out or what is going on but its frustrating. First I was sent the wrong power supply that doesn't work with the device. Then I get an updated 1 and before even 100 cans go through, it is somehow shot? Confused and irritated. When the machine is working correctly, its great. But so far the hassle is more than what it should be. William's Responds: Sorry to hear of all the trouble. We are shipping out a new power supply tomorrow. Regarding the canning machine, it is very sensitive to how tight the can is against the top die. Use the screw thread on the can base to adjust the height so the can with lid just snugs up to the top of the die, and is not loose at all. Do not raise the base so high that the can dents when the lever pushes it into the die, just so it is firm. Also, be sure to leave 1/4" of air space on top of the can, as if the lid is floating on beer or foam it will not seal correctly.

What I’ve been waiting for

Review by Ryan on 11/24/2019

After watching the set up video and a couple of minor tweaks as instructed..: works amazing! So happy I can, can beer now. Yeah a little beer may spray as expected, I bought a couple of magnets and some clear plastic to counter that. Can’t wait to see what these guys come up with next. Side note the flow control keg posts are great as well.