(14)
Average rating 8.64285714285714 out of 10 ( based on 14 reviews )

Worked great

Review by Ck on 5/12/2017

What's to say it's a threaded insert. Used to make 25 custom tap handles for a bar. All threads were clean. To make sure they were all in straight made a fixture for drill press to hold handles while being drill then used a cut off bolt in the drill press to hold the insert and keep it straight while threaded it into the wood. Turned drill press arbor by hand. 1/2" drill bit pre drill is pretty tight might consider 33/64" or 17/32" if I did it again.

Tap handle threaded insert

Review by James Ferreira on 7/25/2017

Made a tap handle for a friend. Worked great!

Works GREAT!

Review by Bob S. on 8/17/2017

I threaded this insert onto a 1 1/2 inch long, 3/8 bolt with a (brass) washer, and then drilled a 3/8th hole, 1 1/2 inches deep before I drilled this same hole out to 9/16th about 5/8th deep. The longer bolt going deeper into the 3/8th hole keeps everything straight, and I hardly needed any pressure at all for it to screw in. The (brass) washer stops the insert flush with the bottom of the tap handle. Now all I have to do is get creative with the scroll saw!

Awesome Product! FAST SHIPPING!

Review by Brett Steinhilber on 4/30/2020

Can't wait to come out with a new product so I can buy more products from William's Brewing. Easy ordering and fast shipping!

Write a Review