Item #: P64
Our Price: $7.99
In Stock, Will Ship On 01/20/2020.


This stainless elbow reduces the head space needed when using a Sankey Coupler. Just screw this on (make sure you put a Q93 Shank Nipple Washer between this and the Sankey out fitting) and your Sankey does not require as much space for its upper beer output nipple or fitting. Standard sankey/shank threading means you can attach the same fittings to the horizontal part of the elbow as you can to the top of the Sankey.


Average Rating:
(based on 4 reviews)

Showing 4 Reviews:

Review and Rate this Item
by Browneye
on 7/31/2019
from So-Cal
A Must Have For Kegerator Clearance
Commercial kegs are taller than corny-kegs anyway, and then the standard liquid connector makes them stupid-tall. This reduces overall height to just a shade more than a corny. 
For you home-brewers that buy a commercial once in awhile like I do, this and the ball-lock adapters lets them hook up to any one of your taps without fiddling with hoses and clamps. 
Once you go beer on tap you never go back!
by Kevin
on 9/19/2016
from Riverside, CA
Works very well for my needs!
I don't need this item because I have tight clearances but if I did, this elbow does the trick. 

My main purpose for this fitting is to have my beer line and CO2 line come together more neatly inside of my keezer. It is a bit of a pricey item for just that, but this item at it's current price is half the price I've seen at other online retailers (ATOP 9/19/16).

Fit and finish is great and a great value.
by heasley
on 11/5/2015
from pdx
I prefer the old model sold by Williams that was not cast and whose female end  had a loose nut so that the outlet could be positioned in any orientation desired. For example, it could be aligned so that the tavernhead inlet and outlet were aligned for easier hose management. The old model however had a higher profile, which was fine for my needs.

Otherwise, this part is very useful for tall sanke kegs in low profile refrigeration boxes.
by Matthew Erickson
on 3/27/2015
from Saint Paul, MN
Worked perfectly
The price was the best i could find, the space savings (about 2-3 inches, surprisingly) was perfect for me.  I have two different style taps, one was also taller than the other so I saved space there too.  The build quality is as expected, seems to be of high quality metal and no clear defects.  Not complaints.
Review and Rate this Item
1/13/2020 5:31:31 AM
What is height dimension of the product?
It is 1" tall, and 2" long
11/3/2018 12:21:36 PM
Will this work with the ball lock drew on adapters?
It will work with our items P61 and P62 Sankey Ball Lock Conversion Posts
Ask a Question

    Email A Friend

    Send this product to a friend...