• KegLand Series X Kegerator
  • Shown with Flow Control Faucets
  • This shows the digital controls with fan switch (the fan is on)
  • The drip tray is removable for easy cleaning

click on thumbnail to zoom
Item #: B26
Our Price: $649.99
Pick Your Optional Beer Tower & Faucet(s)
Discounted Accessories
Quantity:
 
In Stock, Will Ship On 07/07/2020.
  Water Resistant Kegerator Cover (+ $29.99)
  Heavy Duty Caster Upgrade (+ $38.99)

Description  more details

•  Designed by Homebrewers for Homebrewers
•  Wide 26° to 82° F Range
•  Holds four Cornelius style homebrew kegs (8½" diameter)
•  Holds three 1/6 Barrel Commercial Sankey Kegs (9 3/16" diameter)
•  Forward Seal Stainless Intertap Faucets with all tower options
•  Easy to connect Duotight fittings included with all towers
•  Tower Cooling Fan with front panel switch
•  Converts to a Fermentation Chamber and includes a wire shelf
•  Removable Drip Tray for Easy Cleaning
•  Approved For Commercial Use
  One Year Warranty (and we stock all vital spare parts in case you need them after the warranty period)

Cold does not rise. You will find that a beer tower elevated above a refrigerator will always remain warmer than the refrigerator, resulting in initial pours from the kegerator that are warm and foamy, followed by colder pours once you have dispensed a beer or two. At home this is a real problem, unless you pour beers in quick succession. This is the only kegerator to include a tower cooling fan as standard equipment, and also feature a fan on/off switch on the front digital control panel.
 
The beauty of the KegLand Series X is the extended range thermostat included. Unlike kegerators with standard 30° to 50° temperature ranges, the Series X can be adjusted easily with the front panel digital display from 26° to 82° F (ambient temperature permitting), which means you can also use your kegerator as a fermentation chamber for ales in summer, a small refrigerator for food items, or even a wine cellar. Keep in mind the unit only cools, and does not heat, and a temperature of say 65 degrees F. is only possible if the temperature outside the kegerator is 65 degrees or warmer.

The drip tray rests on top of the unit, and can be removed for easy cleaning. This simple two piece design cleans up quick in your sink, and eliminates the need to clean a sticky drip tray on the unit.

 Included with all models are a a C02 bottle mounting bracket,and integral tower cooling fan. You select the beer tower/faucet option that is right for you, and a free KegLand MK4 Dual Gauge Regulator is included.

Setup is easy with Duotight connections included for everything from the faucet shanks to the included regulator. These make it easy to connect and disconnect gas and beer lines, and eliminate the need for hose clamps. As noted below, you will need additional parts depending on how many faucets you get, and if you want to dispense home brew or a commercial keg.

Note that kegerators need 4" of clearance on both sides when installing so they do not overheat, so this model cannot be installed flush into a countertop with no side clearance like a dishwasher.

Note: The Four Faucet Tower option should only be ordered if you are dispensing home brew kegs, as this unit only holds three five gallon sankey commercial kegs.

Needed but not included for each ball lock home brew keg supplied faucet in your tower:
1 B11 Threaded Gas Ball Lock
1 B12 Threaded Beer Ball Lock
2 Z93 Duotight Flare Adapters

For example, if you buy a Triple Tower and plan on dispensing three ball lock kegs, you will need:
3 B11 Threaded Gas Ball Locks
3 B12 Threaded Beer Ball Locks
6 Z93 Duotight Flare Adapters

Needed but not included for each Sankey commercial beer keg supplied faucet in your tower:
1 C34 Stainless Sankey Coupler with relief valve

For example, if you buy a Double Faucet Tower and plan on dispensing two commercial kegs, you will need:
2 C34 Sankey Couplers


Outside Dimensions:
24" wide
25" deep, 31" with C02 Bottle Mounted on back
33.5" tall (just the box, no drip tray, caster wheels, tower, or chrome guard rail)
36" tall (with caster wheels but no drip tray, tower, or chrome guard rail)
52" tall with caster wheels and tower

Internal Dimensions:
19.5" wide
16" deep
28.25" tall

Power Consumption:
.09 Amps

The Kegs Below Will Fit Inside

Homebrew:
5 Gallon 8½" diameter Ball Lock or Pin Lock  Cornelius Keg - 4 ( or 2 Ball Lock and one 1/6 barrel Sankey keg)
2.5 Gallon 8½" diameter Cornelius Keg - 4
5 Gallon 9¼" diameter Cornelius Ball or Pin Lock Keg - 2

Commercial Kegs:
5.16 Gallon Sixth Barrel - 3 
7¾ Gallon any type - 1
15½ Gallon - 1

Note: The All Rounder Fermzilla will fit, although the 27 Liter Fermzilla with valve is too tall to fit.

Depending on your location, this ships via GSO or by Truck signature required. Please provide a good phone number when ordering, as the delivery company may need to call you to schedule delivery.






Kegerator Normal Operating Sounds
KegLand Kegerators have been manufactured with the new r600a refrigerant gas used on many appliances. It is used because it is the most environmentally friendly gas and it is also extremely energy efficient. The new r600a gas does make some unusual sounds and we have recorded, amplfied, and included links to the sounds below so you know what kind of sounds this modern unit makes (all units with r600a gas make similar sounds).

Outside the rear of the unit near the Compressor Click On
Outside the back of the unit near the Compressor Click Off
Inside the Cold Plate with Tower Fan Off
Inside the Cold Plate with Tower Fan On


Kegerator Normal Operating Sounds
KegLand Kegerators have been manufactured with the new r600a refrigerant gas used on many appliances. It is used because it is the most environmentally friendly gas and it is also extremely energy efficient. The new r600a gas does make some unusual sounds and we have recorded, amplfied, and included links to the sounds below so you know what kind of sounds this modern unit makes (all units with r600a gas make similar sounds).

Outside the rear of the unit near the Compressor Click On
Outside the back of the unit near the Compressor Click Off
Inside the Cold Plate with Tower Fan Off
Inside the Cold Plate with Tower Fan On
series X, series X Kegerator, kegland series x

Reviews

Average Rating:
(based on 45 reviews)

Showing 1 - 5 of 45 Reviews:

Review and Rate this Item
RatingReviewerReview
by Jim Smith
on 7/5/2020
from NC
Outstanding product even better service
Some products just deserve a simple wow, this is one of them! The kegerator is very well made, feature rich and easy to setup especially when the unique fittings are included. A quick tour of Youtube found several great videos on how to assemble the unit. It's now installed and working wonderfully, the fan is a bit noisy but well within limits of acceptable noise levels. 

Because of the weight, 150#~ it ships by freight line, expect a delay, but it was worth the wait. Once again WB lived up to the commitment of shipping same day when the order is placed. Even though we are coast to coast distance, NC-CA, I will still buy from WB when ever I need something.
by Steve
on 6/30/2020
from Berlin MD
Kegerator
Replaced Beverage  Air. With this unit.  New one has a lot more plastic but works as it should and it is much quieter.  The compressor is tiny compared to my old unit and consumes way less electricity.
by BP
on 5/29/2020
from Miami
Awesome!
The Kegerator is an excellent machine, with the temp control you can bring down the temp and the beer comes out super. Aesthetically, look great so it could be placed anywhere in the house and looks cool. I definitely recommend it! 
by Ken Hance
on 5/22/2020
from Tucson
Kegland Keg Master Series 4
Nice features,  quality is good so far.  We have been enjoying beer during our Covid19 isolation.  Very convenient and it looks really cool!
by Andy
on 5/11/2020
from Western, NY
Just what I wanted
Fantastic. Much quieter than it sounds in the clips provided on this page. Temp does fluctuate a few degrees up and down from the set temperature, but overall not an issue. Very spacious inside. Easy to assemble and weight is very manageable to move around easily. The tower stays super cold with the cooling fan but does not profusely “sweat” because of it. The flow control is well worth adding on when you purchase it, as is the CO2 tank- hard to beat that price. 10/10, would buy it again and recommend it to any home brewer. Haven’t tried using it for cold crashing, but I have good faith it will handle that no problem when I put a 5 gallon brew in there.
123456789
Review and Rate this Item

Other Items In This Category

QuestionAnswer
Rob
7/2/2020 4:13:03 PM
Just got my unit this week. Been fermenting a Hefeweizen at 68 degrees. Temperature is fine, but the compressor will often click on them immediately click off within a second or two. Occasionally runs for longer. Is this normal?
Yes, as long as the temperature is maintained within 5 degrees or so.
Chris
5/15/2020 3:53:03 PM
Hello, Why do three corny kegs not fit with the CO2 tank inside? I have seen other kegerators of the same dimensions fit 3 kegs and the tank inside, is it because of the cooling fan? If so, is it possible to remove this?
We have not tried this, so we cannot say for sure. I am sure removing the fan and the glass holder will give you more room. The cooling fan can be removed if you unplug it wiring harness.  We just have not tested this, so we cannot recommend this as far as a purchase recommendation.
Chris
5/14/2020 12:19:46 PM
Can you fit the 5lb CO2 tank inside the fridge along with 3 corny kegs and dispense without problems?
No, it would be too tight a fit with three kegs.
Keith
1/1/2020 10:15:53 AM
I've just recently ordered the kegerator with no tower, as I have my existing hardware from my previous kegerator. Does this unit still come with the tower attachment screws, and if not does anyone know what the thread sizes are?
It does not come with tower screws. Tower screws are M5-0.8 metric thread.
12345678910...
Ask a Question

    Email A Friend

    Send this product to a friend...