• Intertap Multi Faucet Tool

click on thumbnail to zoom
Item #: B38
Our Price: $3.99
Quantity:
 
In Stock, Will Ship On 10/21/2019.
Share |

Description 

This Intertap Multi Tool does the following:

• Tightens all tower shank inner nuts, Intertap and other brands

• Tightens Intertap 4" shank holding nuts (but not other 4" shanks)

• Tightens and removes all Faucet Attaching Nuts, Intertap and other brands

• Opens a beer bottle

Reviews

Average Rating:
(based on 4 reviews)

Showing 4 Reviews:

Review and Rate this Item
RatingReviewerReview
by Randy McKnight
on 2/3/2019
from Cortez Colorado
Not reccomended
This thing is a piece of junk. Poorly designed and just doesn't work. This product must have gotten by quality control. 
by Matt
on 2/3/2019
from OR
Doesn't really fit
The finish cut was pretty rough, so most of the cutouts didn't work on the fittings they were intended for. Makes a decent bottle opener. 
by Terry Robertson
on 3/2/2018
from Salem, OR
MFT
Works well, Rebuilt the kegerator and this came in damn handy! 
by Jeff
on 3/1/2017
from Ohio
Does NOT work on tailpiece nuts as shown
I purchased this tool to go with the entire fleet of Intertap equipment I bought - their faucets (non-flow-control), springs, 4" shanks with tailpieces included, tips, etc.  I was very surprised to learn that the smaller wrench opening on this tool did NOT properly fit the nuts that hold the tailpiece to the back of the shank (as shown in the second picture of this product listing).  It barely grips the nut if lined up just right, but will easily pop off.

The metal is also crudely cut and has a lot of rough edges that will hurt your hand if applying much force - trying to tighten down the nuts on the backside (inside) of my Keezer was painful enough to warrant me switching over to my automotive tools.

In short, it might be good for small-time maintenance work, but if you're building or tearing down a multi-line unit, you'll hate this thing.
Review and Rate this Item
QuestionAnswer
Gil Nandez
10/16/2017 9:46:54 PM
Will this fit a 1-1/16 nut?
Yes
Ask a Question

    Email A Friend

    Send this product to a friend...