• Intertap Double Complete Stainless Tower
  • EvaBarrier Beer Tubing,Duotight Shanks, Multitool, and hardware included
  • There is 3.75" between opposite tower holes for mounting

click on thumbnail to zoom
Item #: B63
Our Price: $119.99
In Stock, Will Ship On 05/28/2020.


The Intertap brushed stainless 3" draft tower will add a special touch to your home bar. These can be installed on the top of small refrigerators, and also on the top of a bar surface with a refrigerator underneath. Two stainless Intertap faucets are included, along with all stainless DuoTight Intertap Shanks and 5' of 4mm by 8mm EvaBarrier beer tubing for each shank. In addition, we include 8' of EvaBarrier 5mm by 8mm gas tubing in case you need to hook up your gas line.

This tower is foam-insulated and features a wide 3" body for good cold air circulation (wider towers help keep the top of the tower colder, as they facilitate the flow of cold air from your refrigerator into the tower).

 Towers must be mounted (you need a 3" holesaw) so cold refrigerator air can flow into the tower. Nickel-plated 1½" wood screws and base sealing rubber gasket are included. 12½" tall (16" tall with faucet handle attached), 3" diameter.


Average Rating:
(based on 4 reviews)

Showing 4 Reviews:

Review and Rate this Item
by Randy
on 10/5/2018
from Chicago
Dual stainless Steel tower
Replaced a single tower with this. Installation went well. Current kegerator can had an adapter I removed and the double tapper screwed right in place. Great quality and works better then anticipated. Can’t go wrong with Williams Brewing.
by Coop
on 5/22/2018
from Ca
Good kit
Replaced my original single tap with this kit. Tower and tap very good quality. The tap lines that came with it are not real pliable and are a little lower quality than I would have preferred.  A little difficult to work with. Soften up with some hot water for fitting connections. Overall good product. 
by Matt
on 12/9/2017
from Virginia
Great Tower and Value
I bought the complete tower kit with double faucet and couldn't be happier with it.  It was easy to install (I have an old Summit kegerator from about 2001) and everything seems well made.  I only have one keg running off of it right now but looking forward to getting another hooked up in a couple weeks.
by Dave
on 6/17/2017
from FL
nice looking tower
I needed a larger tower and was going to diy one, but for the price of materials and the two taps with shanks I wouldn't be saving much.

It's nice looking and the taps function well. I didn't use the included tubing, but might give it a try down the road just out of curiosity how it works. There was more than 4 foot of tubing maybe close to 10, I never measured it. The tower cools nicely. I only have 2 small issues with it, that I don't really think effect the rating. It came with machine screws not wood screws, not a big deal I have some on hand. The second thing I did find I had to stick some insulation in the tower around the shank area. I was getting condensation on the outside of the tower in this area (florida in summer doesn't help), but it does show I get good cooling. This really didn't bother me as I put some armaflex tape on the caps anyways and just had to do a little more.
Review and Rate this Item
4/24/2020 1:47:33 PM
Why is is that the intertap faucet closing spring is working with this intertap system. Installed the spring and it's not self closing the tap it stays open as if there is no spring.
Have you tried loosening the crown nut which holds the faucet lever down a bit?
9/14/2019 4:02:59 PM
Are the shanks that the faucets connect to stainless or chrome plated?
The shanks are type 304 stainless.
11/13/2018 10:28:10 AM
Does this come with the black plastic faucet handles and the faucet wrench or would these need to be purchased separately?
Yes. It comes with the tower, taps, tap handles, wrench, tubing and clamps.
3/20/2018 8:21:48 PM
do the holes for the screws on this product mount in an X like fashion or a cross like fashion when lined up correctly?
Not quite sure what you mean here, check out the photo with the ruler on the product page.
Ask a Question

    Email A Friend

    Send this product to a friend...