• Intertap 4"  Stainless Shank Assembly
  • This shows the hole for the L30 Intertap Faucet Closing Spring

click on thumbnail to zoom
Item #: L02
Our Price: $29.99
Quantity:
 
In Stock, Will Ship On 10/23/2019.
Share |

Description 

This stainless shank includes a stainless 1/4" hose barb exit. Features a spring hole to hold the optional Intertap Faucet Spring, a stainless spring that works only with Intertap Shanks and Intertap Faucets to add a self closing function.

The Intertap shank itself fits all beer faucets, but the self closing function is only possible with Intertap Faucets and the Intertap Faucet Spring.

The minimum wall thickness for this shank is 1/2", maximum 2 1/2".  You will need to drill a 7/8" (22mm) hole to install this shank. You can use our item B33 22mm hole saw to drill a suitable hole in metal, plastic, or wood.

 

 

Reviews

Average Rating:
(based on 2 reviews)

Showing 2 Reviews:

Review and Rate this Item
RatingReviewerReview
by Marty
on 3/15/2019
from Michigan
Intertap shaft
Well built, and needed to use the self closing spring.
by Kerry
on 1/1/2017
from Tucson, Arizona
Works very well especially spring loaded
This shank is designed to work with the spring and it does work with that.  Advise:  The spring will not work with a Flow Control handle, but it does work with the regular handle.   It's a very good quality shank and should last a lifetime.
Review and Rate this Item
QuestionAnswer
Nick Parker
6/7/2019 11:46:06 AM
Are these the newer versions that are compatible with the DuoTight fittings? Like these: https://www.kegland.com.au/intertap-duotight-compatible-ss-short-shank.html
No, these are compatible with 3/16" tubing, and have a hose barb.
Curt
5/31/2018 10:18:55 AM
Can you provide a version of this shank with a 1/4" MFL tail piece instead of the bent hose barb tail piece?
No, the hose barb is welded in place. However, we do have a 4" non Intertap Shank (it will not accept the Intertap self closing spring) which is our item  R38. On the back end of this you can attach our item J43 by using backnut Q90, and washer Q93.
Ross
4/13/2018 3:27:23 PM
Is the tail piece removable? I very much would like to have the faucet spring, but I have a very limited space (that is too big for the Intertap Tower Shank) and may have to cut down the length of this one.
Yes, the tail piece is removable.  It is comprised of a nut, a washer and the curved nipple.
Ron
1/12/2018 2:38:59 PM
Does this Intertap shank included the spring?
No, the spring is an optional part
12
Ask a Question

    Email A Friend

    Send this product to a friend...