Quickconnector 1/2" Npt To 1/2" Barbed Elbow

  • Item #S90
  • Price: $16.99
  • Part #
Currently Sold Out

In stock, will ship on Tuesday, December 7

This stainless fitting from Blichmann Engineering features a 1/2" female NPT with sealing silicone O ring for attaching to your chiller or pump, and a 1/2" outer diameter stainless hose barb for tubing.

Sold individually, the pictured sideways fitting is not included (but shown so you can see the insides).

(2)
Average rating 8 out of 10 ( based on 2 reviews )

Easy to clean and use

Review by S Trott on 2/24/2016

I've been brewing with these for over six years. I have two elbows and nine other straight connectors. They are pretty friggen awesome to use! With the silicone grip, i can disconnect hot hoses and the connectors. They always clean up with a quick shake inside some cleaner. I even use them for cold side after the chiller (sanitized of course). After my first set, i had to upgrade the rest of the brewery. I really recommend these hence the five stars because of how easy they connect and clean. Also, I always use a clamp on my hoses. The pinch type works really well. Only thing is they'll let you know it you tighten too tight. Its easy to adjust to get a good seal. If they didn't work well, I'd be looking for something else.

almost there

Review by Gene on 5/7/2012

The knurled nut with o-ring works perfectly. Finger-tight works great. Where it fails is at the barb, which requires a hose clamp to keep the hose secured. The weight of silicon hose (<2.5 feet) with wort pulled off the barb. If the barbs were a little larger, this item would be perfect. My other 1/2" barbs do not need a hose clamp.

Ask a Question