Take your beer with you when you go to the beach, camping, a game, or to a party. This 0-30 PSI regulator fits any threaded ball or pin lock gas connector (connector not included), for quick attachment to you keg.
Our Ball Lock Mini Regulator takes 74 gram Brewer's Edge C02 cartridges, which hold enough gas to dispense a carbonated 5 gallon ball-lock keg. It features a inline stainless check valve between the regulator and the ball lock fitting to protect it from backflowing beer. With this 0-30 PSI model, you can both dispense and force carbonate. Features a 1/4" female beverage flare outlet, to fit standard ball and pin lock keg gas connectors.
This also fits stainless ball lock gas connectors, and our Ultimate Growler, although you will also need our tapered nylon washer (item D87) to seal the metal-to-metal gas connection with these.
The flared outlet on the side that goes to the stainless ball lock fitting can be unscrewed and leaves a 1/8" female NPT port. Into this port you can screw any 1/8" NPT male thread hose barb or threaded outlet (such as our item I80).
The regulator does not include a pictured cartridge, you will be offered a chance to order these when you put this in your cart. Note that C02 cartridges cannot be shipped by air or express, and cannot be shipped outside the lower 48 states due to aviation and postal regulations.
FOR C02 ONLY: This regulator is designed for use with C02 only, and should not be used with higher pressure argon or nitrogen gas.