Female Flare Brewer's Edge® Micro Regulator

  • Item #D53
  • Price: $49.99
  • Part #
Currently Sold Out
Share |

The Brewer's Edge® Micro Regulator combines the precision of a Mini Regulator, with the portability of a simple gas injector. Featuring a 0-30 PSI range, precisely adjustable with the calibrated top knob. Best of all, it takes all standard 16 gram threaded and 74 gram threaded C02 cartridges, so you have the choice of a lightweight compact unit with the 16 gram, or a high capacity unit with the 74 gram cartridge. Lightweight aluminum construction means the total weight is just a hare under 5 ounces.

Features a 0-30 psi C02 regulator that features precise adjustment via the calibrated top adjustment knob. It features a inline stainless check valve between the regulator and the ball lock fitting to protect it from backflowing beer. With this 0-30 PSI model, you can both dispense and force carbonate. Includes a ¼ female flare fitting, to fit threaded gas ball lock disconnects and the Ultimate Growler Dispensing Head.

The flared outlet on the side that goes to the stainless ball lock fitting can be unscrewed and leaves a 1/8" female NPT port. Into this port you can screw any 1/8" NPT male thread hose barb or threaded outlet (such as our item I80).  

The regulator does not include a pictured cartridge, you will be offered a chance to order these when you put this in your cart. Note that C02 cartridges cannot be shipped by air or express, and cannot be shipped outside the lower 48 states due to aviation and postal regulations.

FOR C02 ONLY: This regulator is designed for use with C02 only, and should not be used with higher pressure argon or nitrogen gas.

Click to download the instructions in pdf format.

Average rating 10 out of 10 ( based on 3 reviews )

super micro regulator

Review by Jim on 8/22/2017

This is an extremely well machined/made regulator. There is twist knob pressure adjuster which is very accurate. Set the dial to 5 (per the slash mark on the regulator body) and you get a perfect pour. I use it in conjunction with a Growl Tap (TM) and it makes the tap ever so more useful. The growlers stay under pressure and the beer/ale stays fresh. Well worth the money.

Brewers Edge Micro Regulator

Review by Edgar on 10/25/2017

Absolutely the best, I wish that I could return all other micro regulators that I have purchased in the past. Buy this one don't wast your money on any other micro regulator. Extremely well built, professional quality.

So far, so good!

Review by Tom on 11/7/2017

After going through a few "push-button" micro regulators, exhausting dozens of CO2 cartridges in the process, at last this one seems to be a good solution. I used it on my "Ultimate Growler" tap head adapter, and this regulator made it through to the end. The 16 gram cartridge maintained enough gas to continue until I was finished with the beer, rather than getting one glass and switching out the cartridge. I look forward to future success.

Write a Review

Oct 13, 2017 by Mark

Q: Will this work with pin lock disconnects?

A: Yes, as long as they are threaded and not barbed.

Jun 18, 2017 by Elaine Wahl

Q: Is the check valve integrated into the 1/8 mpt to 1/4 ffl adapter?

A: Yes

Ask a Question