• Gas Ball Lock With Threaded Post

click on thumbnail to zoom
Item #: X44
Our Price: $11.99
In Stock, Will Ship On 05/28/2020.


This complete male gas ball lock post features a dip tube and is seated on a ¼" male thread adapter with backnut. This can be used to add a gas ball lock just about anywhere, or even to to make your own ball lock pressure vessel. 


Be the first to submit a review on this product!
Review and Rate this Item
9/9/2019 11:03:20 AM
How what is the max wall thickness this would work on? In other words, how long is the threaded portion behind the o-ring?
The threaded barrel is 3/4" of an inch long. Once you put the nut on the end of the barrel, the maximum thickness of your tank cannot exceed 1/2"
3/11/2019 7:46:24 PM
What size hole is need for this?
The diameter is .51", so a drill bit size of 13mm or 33/64" will work.
3/31/2018 9:44:33 AM
It's difficult to tell from the picture if the dip tube is long enough for attaching tubing and a clamp; like one might use with a carbonating stone. How long is the dip tube, and how far below the post will it extend?
It does not extend below the end of the fitting, so tubing cannot be attached. You would have to get a longer dip tube,like our Corny beer dip tube item X42, and cut it off below the end of the fitting if you wanted to install tubing and a clamp.
Ask a Question

    Email A Friend

    Send this product to a friend...