• FEMALE FLARE MICRO REGULATOR
  • It is easy to precisely adjust dispensing pressure
  • Fits perfectly on growlers with male flare gas inlets
  • Change from 16 gram to 74 gram C02 capability with a 7/8" wrench (wrench not included)
  • Fits 16 gram and 74 gram threaded C02 cartridges (cartridges not included)

click on thumbnail to zoom
Item #: D53
Our Price: $49.99
Quantity:
 
In Stock, Will Ship On 02/24/2018.
Share |

Description 

The Brewer's Edge® Micro Regulator combines the precision of a Mini Regulator, with the portability of a simple gas injector. Featuring a 0-30 PSI range, precisely adjustable with the calibrated top knob. Best of all, it takes all standard 16 gram threaded and 74 gram threaded C02 cartridges, so you have the choice of a lightweight compact unit with the 16 gram, or a high capacity unit with the 74 gram cartridge. Lightweight aluminum construction means the total weight is just a hare under 5 ounces.

Features a 0-30 psi C02 regulator that features precise adjustment via the calibrated top adjustment knob. It features a inline stainless check valve between the regulator and the ball lock fitting to protect it from backflowing beer. With this 0-30 PSI model, you can both dispense and force carbonate. Includes a ¼ female flare fitting, to fit threaded gas ball lock disconnects and the Ultimate Growler Dispensing Head.

The flared outlet on the side that goes to the stainless ball lock fitting can be unscrewed and leaves a 1/8" female NPT port. Into this port you can screw any 1/8" NPT male thread hose barb or threaded outlet (such as our item I80).  

The regulator does not include a pictured cartridge, you will be offered a chance to order these when you put this in your cart. Note that C02 cartridges cannot be shipped by air or express, and cannot be shipped outside the lower 48 states due to aviation and postal regulations.

FOR C02 ONLY: This regulator is designed for use with C02 only, and should not be used with higher pressure argon or nitrogen gas.


Click to download the instructions in pdf format.

Reviews

Average Rating:
(based on 3 reviews)

Showing 3 Reviews:

Review and Rate this Item
RatingReviewerReview
by Tom
on 11/7/2017
from Houston, TX
So far, so good!
After going through a few "push-button" micro regulators, exhausting dozens of CO2 cartridges in the process, at last this one seems to be a good solution.  I used it on my "Ultimate Growler" tap head adapter, and this regulator made it through to the end.  The 16 gram cartridge maintained enough gas to continue until I was finished with the beer, rather than getting one glass and switching out the cartridge.  I look forward to future success.
by Edgar
on 10/25/2017
from Boise, Idaho
Brewers Edge Micro Regulator
Absolutely the best, I wish that I could return all other micro regulators that I have purchased in the past. Buy this one don't wast your money on any other micro regulator. Extremely well built, professional quality.
by Jim
on 8/22/2017
from Stratford,CT
super micro regulator
This is an extremely well machined/made regulator.  There is  twist knob pressure adjuster which is very accurate.  Set the dial to 5 (per the slash mark on the regulator body) and you get a perfect pour.  I use it in conjunction with a Growl Tap (TM) and it makes the tap ever so more useful.  The growlers stay under pressure and the beer/ale stays fresh.  Well worth the money.
Review and Rate this Item
QuestionAnswer
Mark
10/13/2017 4:33:33 AM
Will this work with pin lock disconnects?
Yes, as long as they are threaded and not barbed.
Elaine Wahl
6/18/2017 7:03:52 PM
Is the check valve integrated into the 1/8 mpt to 1/4 ffl adapter?
Yes
Ask a Question

    Email A Friend

    Send this product to a friend...