• Disconnect Check Valve

click on thumbnail to zoom
Item #: D37
Our Price: $9.99
In Stock, Will Ship On 01/22/2020.

Description  more details

This German-made one way gas check valve features 1/4" threaded flare fittings, to fit standard threaded ball and pin lock gas connectors. Prevents beer from backing up into gas lines. This releases at 3psi, and is a great way to add a one way valve to your threaded ball or pin lock keg connector.

Note: These should not be disassembled, they can be very hard to put back together, and replacement parts are not sold individually. Click on the  for a pdf of the assembly diagram.

This shows the Keg Gas Check Valve screwed onto a ball-lock keg connector.


Average Rating:
(based on 12 reviews)

Showing 1 - 5 of 12 Reviews:

Review and Rate this Item
by Kris Walker
on 11/2/2018
from NH
Quality Check Valve
I have found this to be very effective in preventing liquid into the gas tubing.  

However, my only issue is since it is a pressure release...it does not measure the pressure in the keg as well as a non check valve system.  

An issue I wish I knew prior to ordering.
on 9/3/2018
from New York
Must have in kegging
I can't count how many times I was force carbonating, and beer goes back into the CO2 line.  This solves the problem.  The key is this check valve goes right on the ball valve, so there isn't a way for liquid to come out of the gas line.  I had one at the regulator, and with enough pressure liquid still creeps up.  I have another one that works, but since this is clear you can verify that you aren't having any seepage!  Great product!  
by Mark Bancroft
on 8/22/2018
from California
Gas check valve
Was great alternative to one piece gas ball lock check valve. Did not have enough height in my kegerator for one piece. This and stainless gas ball lock connector fit the bill perfectly.
by Twah
on 5/7/2018
from Lawrenceville
If you have a keg and co2, get these!!!  Have 7 of these for my kegs and my Yeast pitch O2 and packaging CO2.

Saves a lot of time and hassle having to change soiled co2 or o2 lines. 
by Robert
on 2/20/2018
from Columbia, SC
Does the Job
Worked perfectly, no need to worry about any liquid in your hoses. Couldn't ask for a better product at an excellent price.
Review and Rate this Item
8/17/2018 9:22:10 AM
Can these be disassembled and/or cleaned?
Not recommended as replacement parts are not available, and they are very hard to put back together in the correct order.
2/18/2018 8:00:07 AM
Your description says it is a gas-side check valve. Is this also suitable for using on the liquid side of the keg, so one can force carbonate through the dip tube on the beer-out side? The liquid side gives more CO2 contact with the beer over time.
It should work fine on the liquid side, as long as beer does not contact the check valve.
10/24/2017 3:53:11 PM
I use a hose from the dip tube to the bottom of the keg with a carbonation stone on the end. Should this check valve keep the beer from coming into my gas line ? I bought 2 and I am getting beer in the gas line. Do I need to remove the tube with the stone
We are not sure why this is happening, do you know what the pressure in your keg is when this occurs?
10/16/2017 5:44:27 PM
Does this allow gas flow in both directions? Or does it only allow gas flow in a single direction while preventing both gas and liquid flow in the other direction?
This only allows gas to flow in one direction.
Ask a Question

    Email A Friend

    Send this product to a friend...