• Brewzilla Gen 3.1
  • A close up of the control panel
  • Gallon markers from 3 to 8 on the inside, accurate to .2 of a gallon
  • The grain pipe and its components
  • The included stainless chiller is very basic and does NOT include needed ½" interior diameter tubing
  • This shows the unit filled with 4 gallons of water (the marks are slightly off)
  • Shown with optional distilling package R10

click on thumbnail to zoom
Item #: B72
Our Price: $449.99
In Stock, Will Ship On 05/26/2020.


The Gen 3.1 Brewzilla with Pump from Kegland features a recirculation pump with an on off switch, as well as a false bottom and grain pipe to both protect the pump from clogging, and hold the crushed grain above the bottom for good wort circulation. The Unit holds  9 gallons, although we do not recommend boiling more than 6½ gallons (perfect for 5-6 gallon batches). The grain pipe (basket) holds up to 18 pounds of crushed malt, and a pipe with silicone hose on top feeds the recirculated wort from the pump evenly on top of the grain bed.  Runs on any GFCI protected 110 volt plug with at least 15 amps.

 Something like an economy Grainfather, the Brewzilla has an electronic thermostat that lets you set temperature and also has a delayed start feature, so you can program it to turn on up to 23 hours in advance, handy when you want hot strike water when you return home from work.  Multiple temperature rests can be programmed in at the start of mashing, see the pdf instructions below for full details.

 The system includes a Digital Backlit Temperature Control and Display, Malt Pipe, Dual Element Heating (500 and 1000 watts for 1500 watts total), a stainless ball valve with ½ threads to accept any NPT accessory, and a Magnetic Pump installed in the base.  A great deal on a recirculating electric system that will work anywhere you have a suitable 110 volt plug.

NOTE: We include FREE Chiller Tubing Kit (with 15' of tubing, hose clamps, and a female faucet adapter) for the Wort Chiller (a $19.99 value)


     Click to download the current instructions in pdf format.




Average Rating:
(based on 61 reviews)

Showing 1 - 5 of 61 Reviews:

Review and Rate this Item
by Jacob
on 2/26/2020
from Colorado
It's a great little machine with a learning curve
After 4 brews I think I figured it out 
1) never run the recirculating pump at full speed with grain in the basket
2) always allow the grain to sit for 10-15 minutes prior to starting the pump
3) The moment you pull the basket to start a sparge, kick the heat to boil
4) dont use the fine mesh screen unless your malted grain was crushed a little coarser than usual 

The heat up times are a bit slow so buy the jacket for sure. With the jacket in my 30 degree garage I finished a brew in 6 hours. Average times are 4-6 hours per brew day

Use a gfci
by Jim Coleman
on 11/2/2019
from Marion, MS
Still pretty new, but after two brew days...
So my two brew days so far have been uneventful. My first recipe was a honey Kölsch pre made all grain kit. The OG was to be 1.048 at 75% efficiency per the kit. My OG was 1.058. So far samples pulled as I enter secondary fermentation are excellent. This is going to be a good one. The second kit, hefeweizen, also made it to the fermenter with no hitch and above predicted OG. I think the recirculating pump really helps mash efficiency. I also like that I can use the pump to move to fermenter after boil.
  Things that could be better would include controls at bottom of device. If I elevate to make it easier to see and access, then it gets sketchy lifting the mash to Sparge (need step stool). The grainfather looked better in this regard. I don’t really miss the Bluetooth features and I certainly do not miss the price difference.
by Mike
on 8/18/2019
from Michigan
Great for newbies
If you have never brewed before, this would be a great start. Easy to use and comes complete. 
on 8/17/2019
Brewzilla 3.1
I gotta say, this Brewzilla does not disappoint.  20 years as an extract brewer, and I just started all grain brewing last year.  I really think this piece of equipment has cut my brewing time in half.   I had a bit of an issue with the first one I ordered, but the staff of Williams Brewing took great care of me!  I am a customer for life.  :)  I like the fact that I can program a start time to heat up my water so I am ready to go when I want to brew.  Did a test brew this last weekend and everything went great.  Looking forward to brewing more often!
by Eric Peterson
on 8/6/2019
from Tennessee
All grain for an extract brewer
20 years of extract brewing, finally decided to try Robobrew with 10.5 lbs grain and a brown ale recipe. Checked water volumes beforehand, adjusted accordingly (uniformly low approx. 2 qts/ 2 l).  Pre-heat: great! Mash-in: clogged the recirc pump when trying to hydrate the grains; cleared in 30 sec with a bit of lung work! Mash temp held well with neoprene jacket; as advertised, bottom temp 2-4 deg F off wort above upper screen. Recirc slow, overflowed into siphon a bit—don’t forget, small diameter end fits atop the siphon tube! Sparging: very slow, but I have nothing to compare as an extract brewer—25-30 min. Approx. 35 min to boil with both elements on. Held the boil well; 2 oz hops w/o bag or spider gave no run off clogging—might hesitate to hop more w/o one or the other. Clean up-really my only complaint: nothing in instructions or on the .au website/blog. 
All in all, very easy to use, well made, easy to assemble, and a reasonably priced entry to all grain! Enjoy
Review and Rate this Item

Other Items In This Category

3/27/2020 9:24:55 AM
What’s the difference in the robobrew and the brewzilla here in the US?
The main difference it the two is the upgraded power board in the Brewzilla. They changed the name from Robobrew to Brewzilla  when they upgraded the power board.
5/31/2019 1:35:09 PM
Hi Williams B, Say would know what size gauge wire is used in the Robobrew cord? 16,18 or 14? wiring up a spot for the RB to go and would like to cover all the bases. Cheers
The stripped stranded power cord wire is 18 gauge (we measured the ground wire in the cable).
12/11/2018 7:21:57 PM
What kind of warranty comes with the robobrew gen 3?
One year
11/25/2018 6:48:37 PM
I see an answer offering this is a single wall system. Isn't double? The outer shell and the inner basket that holds the grain?
Yes, the inner basket is included. It is not double wall like the Mash & Boil, which has a double wall on the boiler part to help retain heat.
Ask a Question

    Email A Friend

    Send this product to a friend...