Mash & Boil
  • This shows the grain basket on its side
  • T65 Brewer's Edge Thermometer in the provided lid hole (thermometer not included)
  • This shows the grain basket lifted and locked for sparging
  • This shows inside with the temperature probe and valve backnut
  • This shows the inside gallon markers
  • The ½" hose barb can be unscrewed, leaving ½" threads to fit all ½" NPT accessories such as item L70
  • This shows it with optional lid L14 and optional Condenser P34
  • With the grain basket on the side
  • Shown with optional Distilling Lid & optional T500 Copper Condenser
  • This shows optional lid L14 with a #10 stopper and airlock as a fermenter

click on thumbnail to zoom
Item #: B27
Our Price: $299.99
Discounted Accessories
In Stock, Will Ship On 03/18/2018.
Share |


• Simple to use
• High quality components throughout for dependable operation
• Versatile - Mash, Boil, and Distill with optional Distilling package

Do you want to get into mashing but want something simple? The patent pending Brewer’s Edge® Mash & Boil makes it easy. No need for an outdoor burner, complicated brewing stand, or a 220 volt special circuit - it plugs into any 110 volt GFI household outlet. The Mash and Boil’s exclusive double wall stainless construction conserves heat to achieve a rolling boil with only 110 volts and 1600 watts, and its precise thermostat and internal sparging basket lets you mash and boil in the same vessel.

A typical brew day with the Mash & Boil begins with formulating your 5 gallon all grain recipe (up to 16 pounds of crushed grain can be mashed), and then heating your strike water to 162° F, the preset heat temperature. After 40 minutes or so, your strike water is 162° F, and you mix your crushed grain into the sparging basket already inside the Mash and Boil. The mash will cool to 152° or so, and then you set your thermostat to 150°, cover, and let mash for 1 hour. During this mash time you will need to separately heat 3 gallons of sparge water to 175° in a separate pot you provide. A thermometer hole is provided in the lid, in case you want to monitor the temperature of the top of the mash with any long probe analog or digital thermometer.
After one hour, lift the sparging bucket and lock on its included legs, and let the malt sugar drip into your Mash & Boil, which has now became a boiling pot. Turn the thermostat up to 218° F. and give it about 40 minutes to heat to a boil. During this time, ladle one gallon of hot sparge water at a time into the top of the sparging basket until you get to 5½ gallons. Now remove the grain basket, and when the boil begins, add your hops as per your recipe. Boil for 1 hour, and then cool with a suitable wort chiller (not included, our item E81 works well as does any immersion chiller that is up to 11" in diameter). Or use the stainless valve with ½” hose barb to run the wort through your external chiller.

The Mash & Boil features an adjustable thermostat with a range of 45° F. to 218° F. (switchable from Fahrenheit to Centigrade) with an adjustable run time preset at 3½ hours for safety. It also features a delayed start timer, so you can program the Mash and Boil to turn on up to 24 hours after setting. For example, load it with strike water, and have it set to be hot when you come home from work to save time. Intended for 5 gallon batches, maximum capacity is 7½ gallons. 28” tall closed, 40” tall with basket, 14” wide. A 5' power cord is included.
Convert the Mash & Boil to a still with optional Mash & Boiling Distilling Package (see at right).

  Click to download the Mash & Boil instruction manual.

  Click to download the instructions for switching from Fahrenheit to Centigrade.


Average Rating:
(based on 38 reviews)

Showing 1 - 5 of 38 Reviews:

Review and Rate this Item
by Joe Whiting
on 2/26/2018
from Skaneateles, Ny Y
Jump In !
As a long time extract and specialty grain home brewer it was inevitable that I would go into all grain but so many choices and so many steps. This machine worked like a charm the first time I used it. It simplifies and de-mistifies the process. Very reasonable  price, quick service and a human voice at the other end of the phone. I can't wait to brew my next batch ! The only thing I would add is that the directions for the amount of sparge water is way off ( too low ) so just adjust until you get over the 5 gallon mark for the final boil. If you are as confused as I was about what system to try, I'll make the decision easy; get The Brewers Edge Mash & Boil, you won't be disappointed .
by Chuck
on 2/5/2018
from Gig Harbor, WA
Good Extract to All-Grain Transition
After using extract and partial mashes for almost 20 years I finally took the plunge into the all-grain arena.  This is an excellent way to do it, and I'm very happy with the purchase.  I've only brewed one batch so far, but everything works as advertised.  I brewed in the garage, which was about 50F, which pleased my wife because I'm finally out of the kitchen (at least for the hop's boil), and unit heated the water about the same as the stove.  It took an hour, maybe two, longer. but I think the time was due to the all-grain procedure and not the unit.  Mashing and sparging just takes longer, than extract, and I'm still figuring things out.  I still have to heat up the sparge water, and of course use the kitchen sink, so I'm not totally out of the house.  I got a hop leaf stuck in the valve, so I couldn't use it to drain the wort into the fermenter.  I think I'll try putting the hops in a grain bag next time.  Other than that the unit worked like a champ.  I highly recommend it.
by Dean Kelly
on 1/26/2018
from St. Louis, MO
I've had several setups, first stovetop-DM, then all-grain with a cooler mashtun on stovetop, then propane burner all-grain and finally this.

It is definitely smaller than my previous setups (I still have components, I could still do a LARGE all-grain mash with my 10 gal cooler if needed) this thing takes the cake and makes brew day easy.

The further I've gotten into brewing (about 3 years) the more honed my tastes have come and the less need I have had to make the "biggest baddest beer around". I have 4 taps I like to keep filled with great homebrew and having this helps immensely.

It's compact, the sparge process is simple, no need for pumps just open the spigot at the bottom, fill a container and dump it up top. While I do recommend double-milling your grain it still makes a good batch without it.

Transferring to the fermentor is a breeze!

The delayed start is nice for days I have the forethought to use it, especially with a mini RO setup.

I cannot recommend this thing enough.
by DougA
on 1/8/2018
from New Jersey
More powerful than expected
I received the Mash and Boil as a gift for Christmas.  I promptly purchased ingredients and planned a batch of Janet’s Brown.  The ability of the unit to deal with the extremely low trmperatures on New Year’s Day was impressive.  I was Brewing in a 20 degree garage.  There were some hurdles, as you would expect when learning a new system, but I am very happy after my first brewday.  I look forward to many more.
by Anthony
on 12/14/2017
from Centennial
I have seen some reviews which mentioned poor packaging. I just received mine today and I thought the packaging was very adequate - double box with bubble wrap between boxes and good polystyrene protection for the unit in the inner box. Arrived in great condition. I have two 'brews' on the go at present so may not use the unit for a week or more - will review again after use but looking forward to my next session !
Review and Rate this Item
3/6/2018 9:14:17 PM
Can you provide overall dimensions of the unit - trying to figure out if it will fit on my working areas. What is the inside diameter to find the right cooling coils.
The interior dimensions of the boiler are 11.5" wide, and 19" deep.
Genaro Garza
3/6/2018 9:10:19 AM
what is the warranty on this unit?
One year parts and labor
Steven Weinberger
3/2/2018 9:46:07 AM
Would a Pot Still Alembic Dome Top (Still Spirits) fit this?
No, the only distilling lid that fits this is our item L14.
2/27/2018 8:05:46 AM
Do you recommend a particular sparge arm for the M & B, susceptible as the Fermentap or something else? Thanks!
We just dump sparge water into the top a half gallon or so at a time, and do not have any problems with efficiency. If you are using a pump, something like the Fermentap or even a simple float ball on silicone tubing would work.
Ask a Question

    Email A Friend

    Send this product to a friend...