• 7.6 Gallon Kegland Kegmenter

click on thumbnail to zoom
Item #: C65
Our Price: $179.99
In Stock, Will Ship On 05/28/2020.


The Kegmenter is a 7.6 gallon (29 liter) 304 stainless keg with a 4” diameter tri clover lid on the top. Ball lock fittings with dip tubes are built into the lid so you can use this as either a large ball lock keg or a 10 gallon fermenter. The beer dip tube features a silicone hose and floating pick up ball, to collect the clearest beer from the top of the keg.

The Kegmenter features a 50 PSI rating (with an included lid red relief valve set at 35 PSI) so it can be used as a keg or as a pressurized fermenter if desired.  The 4” diameter lid makes it easy to clean out, and adds the ability to add dry hops and other additives either during a ferment or after kegging. The relief valve is standard Corny style, and can be swapped with other corny compatible valve with different pressure ratings.

Convert a Kegmenter into a 6 gallon capacity flame fired or electric distilling unit with the optional 4" Tri-Clover Adapter (item Z49), 2" Tri-Clover Clamp (item Z57) and Kegland Pot Still Condenser  (item B78).  To make the Kegmenter electric, drill a 32mm hole near the bottom and install our 1600 Watt Heating Element, item X97.

The ability to hold up to 50 PSI also means the Kegmenter can be used with an adjustable pressure relief valve to naturally carbonate in the keg,  or to push beer out when the ferment is done with C02, either into smaller kegs, a filter, or even dispense from the fermenter if desired. 15.5” tall, 15.5” wide.

Note: The Kegmenter we sell includes the upgraded Ball Lock Post Lid with floating beer pick up tube, and does not come with the flat lid pictured in the first part of the video. It can be used right out of the box as a ball lock keg, 


Average Rating:
(based on 1 review)

Showing 1 Review:

Review and Rate this Item
by J-Suddsy
on 2/29/2020
from Upstate NY
Options Plenty-Highly Recommend
Well made and heavy, but the beauty of pumping CO2 into it means you don't have to move it once fermentation is done. I used fermentation lid and airlock then switched lids to what is seen on offering. I strongly suggest using keglube for gasket under lid and trim-clamp when gas is added, that prevented my leaking when hit with just enough gas to purge, and it held pressure!!! It actually is starting to carbonate and with keg jumper will put in keg next week...to finish and condition...
I have used Williams Brew for all my kettles (5) and both kegmenters, their customer service and speed of delivery is fantastic, as I live in NY!!!!
Review and Rate this Item
Be the first to submit a question on this product!
Ask a Question

    Email A Friend

    Send this product to a friend...