• 4 Liter KegLand Mini Keg
  • Shown with optional tap P07
  • Stacks by itself or with smaller P09 Two Liter Kegland Mini Keg
  • Shown with optional C02 Regulator Z78 and optional Tap R66

click on thumbnail to zoom
Item #: P11
Our Price: $39.99
Mini Keg Accessories


Quantity:
 
In Stock, Will Ship On 09/22/2019.
Share |

Description 

The KegLand Stainless Steel Mini Beer Kegs are specifically designed for home brewing/growler dispensing. They are suited to small batches and suited to people who want to fit them into their home refrigerators. You can naturally carbonate using priming sugars or force carbonate and serve your beer with the optional ball lock lid (item P07, see at right).  They come with a silicone gasket sealed stainless threaded lid, so you can fill them with beer and let them naturally carbonate, or carbonate as needed with the optional P07 ball lock lid. You will be given a chance to buy this lid (you do not need a  Ball Lock Lid for every keg) when you put this in your cart.
 
These fit into a standard domestic refrigerator. The optional Ball Lock lid for these  kegs use a flexible silicone dip tube the kegs can also be dispensed on their side or upright. The flexible silicone dip tube of  lid P07 is heavier than beer, and will sink to the bottom even if the kegs are on their side.  Kegs are equipped with a 30 PSI relief valve, and have a maximum pressure of 45 PSI.

Kegland Mini Kegs use the gold standard acid bath electrolosis to pacify the 304 grade stainless steel making the more resistant to rust than any other mini keg on the market. These are the only mini keg that uses a special robotic technique to weld the kegs from the inside out. This means KegLand gets a superior welding finish that is more sanitary than any other mini keg available. Although there are many other mini kegs that come from China simply none have the quality and finish as the genuine KegLand minikegs. See the video below for the KegLand welding story.


This 4 Liter (135 fluid ounce) model is 13" tall and 5.25" wide. With optional Ball Lock Lid P07, it is 14.5" tall.




Reviews

Average Rating:
(based on 1 review)

Showing 1 Review:

Review and Rate this Item
RatingReviewerReview
by Darryl Y
on 4/2/2019
from Alameda, Ca
Great mini-keg
Perfect size to fit in my home fridge. I attached the PO7 ball lock
Top and always have cold beer on tap. Excellent quality welds, built
to last a lifetime. 
Review and Rate this Item
QuestionAnswer
Jason
4/4/2019 9:36:27 PM
How tall is this with the Ball Lock Lid and The Flow Control Faucet on it?
The 4 liter mini keg (P11) with the ball lock lid (P07) and the flow control keg faucet (R67) attached stands 20 3/4" from the highest point of the handle to the base of the mini keg.
Scott
3/16/2019 8:35:00 PM
Can this be ordered with a PRV cap? I have a kegsmith tap and would like an extra bottle for conditioning craft beer with a PRV cap. I liked the info on it having inside TIG welds.
We do not have a pressure relief valve cap, but do have our item P07 Ball Lock Lid, which in addition to ball lock in and out fittings, has a pressure relief valve.
Steve
10/28/2018 7:04:29 AM
Do you have to use the tapper or can you use a picnic tap?
If you have optional Ball Lock Lid P07, you can use any type of tap that will connect the beer out ball lock fitting, a picnic type tape with hose will work well, like our item D21.
S
10/10/2018 9:28:02 PM
Description reads: "This 4 Liter (135 fluid ounce) model is 13" tall and 5.25" wide. With optional Ball Lock Lid P07, it is 11.5" tall." How can it be 1.5" shorter with the ball lock lid? Please check and report correct dimensions. Thank you.
Sorry, it is 14.5" tall with the ball lock lid.
Ask a Question

    Email A Friend

    Send this product to a friend...