• Cannular Canning Machine

click on thumbnail to zoom
Item #: X46
Our Price: $499.99
We are currently out of stock. Enter your email below to receive a back in stock notice. More stock should arrive on: 7/23/2019.
Email me when this is available 
Share |


The KegLand Cannular can seamer is one of the most compact and easy to use benchtop can seamers around. With a single operator you can seam/seal the cans in under 5 seconds meaning this compact machine is suitable for small breweries or brewpubs doing small production runs. The Cannular comes with a die for a size 202 beer can lid.  Additional dies will be available in the future, but for right now, only cans with a size 202 lid can be canned on this machine. 

SAFE 24 VOLT POWER (OPTIONAL) If you have ever used a can seamer you would know that you can sometimes spill liquids while processing cans. As a result we have made the Cannular machine with 24v DC so even when you make a mess you don't have a risk of electrocuting yourself. This also makes the machine easier to clean and wash down. An optional step down transformer plugs into any 110 volt outlet. If you do not purchase this optional transformer, you need to get an Anderson Plug twin wire lead so you can feed power into the Cannular Canning Machine.  Suitable DC power sources besides transformers include cordless drill batteries, and even car batteries.

GO ANYWHERE & EASILY RECYCLED Cans are a fantastic choice for outdoor events, parties, pool events, or at the beach. Broken glass can be dangerous and difficult to clean up completely. Cans on the other hand are the safest choice in this respect.

LIGHT BLOCK  Many beverages especially beer can get damaged quickly due to light. If you expose many beers to sunlight for even 5 minutes the beer can become light damaged ("skunked"). Even softer light such as indoor lights will damage beer over time and noticeable skunking can occur with both incandescent and fluorescent light globes within hours. So unless you keep your glass bottles in the dark all the time you will compromise the beer quality. Aluminium cans solve this problem by blocking 100% of damaging light. Dimensions 14" depth x 9" wide x 20" height.

The Cannular Canning machine comes already adjusted to use the 500ml cans that we sell. If however you use different can sizes or the machine has become out of alignment in shipping you may need to adjust the Cannular. Click HERE for adjustment instructions.


Average Rating:
(based on 1 review)

Showing 1 Review:

Review and Rate this Item
by Brian Green
on 6/8/2019
from PA
Revised: Cannular Canning Machine - simple and sweet
I've now did a 3 case can run, so thought I'd update my review.

Apparently some of the power supplies were bad.  I didn't have this issue, but it's pretty cool that William's reached out to all that purchased this item to get in front of the problem and offer temporary solutions while they wait for good power supplies to come in.

I had a few seems fail early, which I think were because I didn't push the can top down enough and foam raised the top before it got a good seal.  After having this happen a couple of times in the first 10 cans or so, I made sure to fully press the top down and didn't have any further issues.  All together it took me 77 cans to get 72 good cans.  Two from bad seals that were my fault, two that leaked from can damage, and one that I tried to fill right from my tap like a crowler and didn't get a full enough can - jury is still out if I can use this to quickly fill from my taps to replace growlers.  

Looking forward to cracking these open in a few weeks!
Review and Rate this Item
6/6/2019 8:21:04 AM
How does the canner work in the US without the Transformer? Is that needed for use?
The Cannular has a female Anderson Plug in the back that the optional transformer plugs into. You can also buy an Anderson Plug Power Lead and run the Cannular on anything from a cordless drill battery (about 200 cans sealed per battery) or even a 12 volt car battery.
Ask a Question

    Email A Friend

    Send this product to a friend...