• 13.2 Gallon Kegmenter (Actual Shipping)
  • 4" Diameter lid means it is easy to clean

click on thumbnail to zoom
Item #: B45
Our Price: $199.99
We are currently out of stock. Enter your email below to receive a back in stock notice. More stock should arrive on: 9/17/2019.
Email me when this is available 
Share |


The Kegmenter is a 13.2 gallon 304 stainless keg with a 4” diameter tri clover lid on the top. Ball lock fittings with dip tubes are built into the lid so you can use this as either a large ball lock keg or a 10 gallon fermenter. The beer dip tube features a silicone hose and floating pick up ball, to collect the clearest beer from the top of the keg.

The Kegmenter features a 50 PSI rating (with relief valve) so it can be used as a keg or as a pressurized fermenter if desired.  The 4” diameter lid makes it easy to clean out, and adds the ability to add dry hops and other additives either during a ferment or after kegging.

The ability to hold up to 50 PSI also means the Kegmenter can be used with an adjustable pressure relief valve (see item P84 below) to naturally carbonate in the keg,  or to push beer out when the ferment is done with C02, either into smaller kegs, a filter, or even dispense from the fermenter if desired. 23” tall, 17” wide.

This is an actual shipping item, Fedex Ground charges based on your delivery zip code will be calculated at checkout.


Average Rating:
(based on 4 reviews)

Showing 4 Reviews:

Review and Rate this Item
by Tom C.
on 2/11/2019
from Terrace Park, OH
Dual use - great quality
This works great as both a serving vessel as well as a fermentor.  I bought a 4" to 1.5" tri-clamp reducer for a better blow-off valve.  Works great!
by Kevin W.
on 1/23/2018
from Novato
Looks Great, Feels Great
The keg and welding is of high quality, I 10 gallons of NEIPA in right now carbonating... i’ll know I a couple of days how the keg held up to the  carbonation task, and how well it dispenses?

I will follow up!
by Mike
on 7/24/2017
from Bishop, Ca
So far, very impressed!
I am currently in the midst of my first batch with this fermentor but so far, I really couldn't be happier.  For one thing, I know my beer is not being subjected to any light, so that makes me happy.  Second, it is certainly airtight.  The Tri-Clamp fittings at the top are top notch and secure.  Thirdly, the top fittings allow me to take a sample of my creation anytime I want without fear of contaminating my brew!  The only drawback is that once filled, this fermentor is heavy, and not very mobile.   Make sure to have a helper assist in placing this guy wherever you are fermenting, and then leave it there until you transfer out of it!!!  (Or start lifting REAL weights and not 12-16oz at a time....)
I would highly recommend this if you are serious about fermenting good beer at home.  Plus your friends will think you are pretty awesome too!
by Dennis
on 12/17/2016
from PA
Nice Keg!
Just received my keg today and I must say I'm impressed. The lid assembly is top notch. Tri-Clover type sanitary fittings cannot be beat  .... you know that this lid is going to seal tight without a doubt! 
Review and Rate this Item
David Swaciak
7/6/2019 11:51:27 AM
Is there an adapter to connect the ball locks to a 1/2 mpt quick connect?
We do not have such an adapter.
George L.
9/16/2018 6:45:12 PM
Is the bottom of this keg flat or curved?
Curved inwards
5/25/2018 1:44:10 AM
If I wanted to use this as both a fermenter at times but at other times as a serving keg, can I get a replacement dip tube to adjust the length of one without having to deal with one permanently cut dip tube? How long is it compared to a standard dip tube
The liquid dip tube in this item is 19.75 inches long.  A standard 5 gallon dip tube is 23.25 inches.  The width is standard, so any other modified dip tube you wanted to swap out will fit, widthwise.
Chris McNally
1/23/2018 3:22:50 PM
is there a sankey style keg lid available for this?
No, just the ball lock lid in the picture
Ask a Question

    Email A Friend

    Send this product to a friend...